Revise paste "SSD1306 Setup" rev_01

/********* Pleasedontcode.com **********

Pleasedontcode thanks you for automatic code generation! Enjoy your code!

- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

- Project: "SSD1306 Setup"
	- Source Code compiled for: ESP32 DevKit V1
	- Source Code created on: 2024-02-17 06:40:19

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* wyswietl na wyswietlaczy encje pobrane z home */
	/* assistant */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <Wire.h>
#include <Adafruit_SSD1306.h>
#include <U8g2_for_Adafruit_GFX.h>

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF I2C PINS *****/
const uint8_t displey_SSD1306OledDisplay_I2C_PIN_SDA_D21 = 21;
const uint8_t displey_SSD1306OledDisplay_I2C_PIN_SCL_D22 = 22;
const uint8_t displey_SSD1306OledDisplay_I2C_SLAVE_ADDRESS = 60;

/****** DEFINITION OF LIBRARY CLASS INSTANCES *****/
Adafruit_SSD1306 display(128, 64, &Wire, displey_SSD1306OledDisplay_I2C_PIN_SDA_D21, displey_SSD1306OledDisplay_I2C_PIN_SCL_D22);
U8G2_FOR_ADAFRUIT_GFX u8g2_for_adafruit_gfx;

void setup(void) {
  // Initialize display and U8g2_for_Adafruit_GFX
  display.begin(SSD1306_SWITCHCAPVCC, displey_SSD1306OledDisplay_I2C_SLAVE_ADDRESS);
  u8g2_for_adafruit_gfx.begin(display);
  
  // System Requirement 1: Display entities from home assistant
  // Code to fetch and display entities from home assistant
  // Wyswietl na wyswietlaczy encje pobrane z home assistant
  
}

void loop(void) {
  // Loop through system requirements
  
  // System Requirement 1: Display entities from home assistant
  // Code to fetch and display entities from home assistant
  // Wyswietl na wyswietlaczy encje pobrane z home assistant
  
  // System Requirement 2: Add more system requirements here
  
  // Additional code for other system requirements
  
  // Add delay or other logic if needed
}