Revise paste "Button Navigation" rev_08

/********* Pleasedontcode.com **********

Pleasedontcode thanks you for automatic code generation! Enjoy your code!

- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

- Project: "Button Navigation"
	- Source Code NOT compiled for: Arduino Uno
	- Source Code created on: 2024-06-07 04:13:09

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* lcd display i2c  20x4  button pin11 UP LOW menu up */
	/* button pin10 UP LOW menu enter  button pin12UP LOW */
	/* menu down  Temperatur  submenu   MaxTemp */
	/* ->max_temp -= 0.1;  MinTeamp->min_temp -= 0.1; */
	/* Durchfluss(Flow)  submenu   MaxFlow ->  MinFlow -> */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <EasyButton.h>  //https://github.com/evert-arias/EasyButton
#include <LiquidCrystal_I2C.h>  //https://github.com/marcoschwartz/LiquidCrystal_I2C

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t UP_BUTTON_PushButton_PIN_D11 = 11;
const uint8_t DOWN_BUTTON_PushButton_PIN_D12 = 12;
const uint8_t ENTER_BUTTON_PushButton_PIN_D10 = 10;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
EasyButton buttonUp(UP_BUTTON_PushButton_PIN_D11);
EasyButton buttonDown(DOWN_BUTTON_PushButton_PIN_D12);
EasyButton buttonEnter(ENTER_BUTTON_PushButton_PIN_D10);

// Initialize the LCD with the I2C address 0x27 and a 20x4 display
LiquidCrystal_I2C lcd(0x27, 20, 4);

/****** VARIABLES FOR MENU *****/
float max_temp = 100.0;
float min_temp = 0.0;
float max_flow = 10.0;
float min_flow = 0.0;
int menu_index = 0;
int submenu_index = 0;
bool in_submenu = false;

/****** CALLBACK FUNCTIONS *****/
void onButtonUpPressed() {
  if (in_submenu) {
    if (submenu_index == 0) {
      max_temp -= 0.1;
    } else if (submenu_index == 1) {
      min_temp -= 0.1;
    } else if (submenu_index == 2) {
      max_flow -= 0.1;
    } else if (submenu_index == 3) {
      min_flow -= 0.1;
    }
  } else {
    menu_index = (menu_index - 1 + 4) % 4; // Wrap around menu index
  }
  updateLCD();
}

void onButtonDownPressed() {
  if (in_submenu) {
    if (submenu_index == 0) {
      max_temp += 0.1;
    } else if (submenu_index == 1) {
      min_temp += 0.1;
    } else if (submenu_index == 2) {
      max_flow += 0.1;
    } else if (submenu_index == 3) {
      min_flow += 0.1;
    }
  } else {
    menu_index = (menu_index + 1) % 4; // Wrap around menu index
  }
  updateLCD();
}

void onButtonEnterPressed() {
  if (!in_submenu) {
    in_submenu = true;
    submenu_index = menu_index;
  } else {
    in_submenu = false;
  }
  updateLCD();
}

void updateLCD() {
  lcd.clear();
  if (!in_submenu) {
    lcd.setCursor(0, 0);
    lcd.print("Menu:");
    lcd.setCursor(0, 1);
    lcd.print(menu_index == 0 ? "> Max Temp" : "  Max Temp");
    lcd.setCursor(0, 2);
    lcd.print(menu_index == 1 ? "> Min Temp" : "  Min Temp");
    lcd.setCursor(0, 3);
    lcd.print(menu_index == 2 ? "> Max Flow" : "  Max Flow");
    lcd.setCursor(0, 4);
    lcd.print(menu_index == 3 ? "> Min Flow" : "  Min Flow");
  } else {
    lcd.setCursor(0, 0);
    if (submenu_index == 0) {
      lcd.print("Max Temp: ");
      lcd.print(max_temp);
    } else if (submenu_index == 1) {
      lcd.print("Min Temp: ");
      lcd.print(min_temp);
    } else if (submenu_index == 2) {
      lcd.print("Max Flow: ");
      lcd.print(max_flow);
    } else if (submenu_index == 3) {
      lcd.print("Min Flow: ");
      lcd.print(min_flow);
    }
  }
}

void setup(void) {
  // Initialize serial communication
  Serial.begin(115200);

// Initialize buttons
  buttonUp.begin();
  buttonDown.begin();
  buttonEnter.begin();

// Attach callback functions to buttons
  buttonUp.onPressed(onButtonUpPressed);
  buttonDown.onPressed(onButtonDownPressed);
  buttonEnter.onPressed(onButtonEnterPressed);

// Initialize the LCD
  lcd.init();
  lcd.backlight();
  updateLCD();

// Set pin modes for buttons
  pinMode(UP_BUTTON_PushButton_PIN_D11, INPUT_PULLUP);
  pinMode(DOWN_BUTTON_PushButton_PIN_D12, INPUT_PULLUP);
  pinMode(ENTER_BUTTON_PushButton_PIN_D10, INPUT_PULLUP);
}

void loop(void) {
  // Read button states
  buttonUp.read();
  buttonDown.read();
  buttonEnter.read();

// Your main code here, to run repeatedly:
}

/* END CODE */