Revise paste Ultrasonic Setup rev_01

/********* Pleasedontcode.com **********

Pleasedontcode thanks you for automatic code generation! Enjoy your code!

- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

- Project: Ultrasonic Setup
	- Source Code NOT compiled for: Arduino Uno
	- Source Code created on: 2024-05-02 14:32:35

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* Set pin 6 as output read 1 ultrasonic sensor */
	/* detect something set pin 6 to high and if it is */
	/* high then set it to low then read 2nd ultrasonic */
	/* sensor if someone detect set pin 6 high and if it */
	/* is high then set it to low   Digital pin 6 as */
	/* output */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <Ultrasonic.h> // https://github.com/ErickSimoes/Ultrasonic

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void updateOutputs(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t sensor_HC_SR04_Echo_PIN_D3 = 3;

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t sensor_HC_SR04_Trigger_PIN_D2 = 2;

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
/***** used to store raw data *****/
bool sensor_HC_SR04_Trigger_PIN_D2_rawData = 0;

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
/***** used to store data after characteristic curve transformation *****/
float sensor_HC_SR04_Trigger_PIN_D2_phyData = 0.0;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
Ultrasonic ultrasonic(sensor_HC_SR04_Trigger_PIN_D2, sensor_HC_SR04_Echo_PIN_D3);

void setup(void)
{
    // put your setup code here, to run once:
    pinMode(sensor_HC_SR04_Echo_PIN_D3, INPUT);
    pinMode(sensor_HC_SR04_Trigger_PIN_D2, OUTPUT);
    pinMode(6, OUTPUT); // Set pin 6 as output for ultrasonic sensor 1
}

void loop(void)
{
    // put your main code here, to run repeatedly:
    updateOutputs(); // Refresh output data
}

void updateOutputs()
{
    digitalWrite(sensor_HC_SR04_Trigger_PIN_D2, sensor_HC_SR04_Trigger_PIN_D2_rawData);
}

/* END CODE */