Revise paste WiFi Dashboard rev_03

/********* Pleasedontcode.com **********

Pleasedontcode thanks you for automatic code generation! Enjoy your code!

- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

- Project: WiFi Dashboard
	- Source Code NOT compiled for: ESP32 DevKit V1
	- Source Code created on: 2025-10-29 01:23:26

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* no need any push button and create code for esp32 */
	/* c6 dev module and webserver for control and all */
	/* serial monitor as primery status reciver */
/****** END SYSTEM REQUIREMENTS *****/

/* START CODE */

// Include the WiFi library for network functionalities
#include <WiFi.h>

// Function prototypes
void setup(void);
void loop(void);

// WiFi credentials and server setup
const char* ssid = "";
const char* password = "";

// Web server at port 80
WiFiServer server(80);

// Variable to hold the latest serial message
String serialStatus = "";

void setup() {
  Serial.begin(115200); // Initialize serial communication at 115200 baud rate
  WiFi.mode(WIFI_STA); // Set WiFi to station mode
  delay(100); // Short delay to initialize WiFi
  Serial.println("Starting Wi-Fi jammer..."); // Indicate start

// ESP32 WiFi channel configuration
  // Note: The below code sets WiFi channel to 6
  // Proper channel setting may require low-level WiFi init (not shown here fully)
  // or using WiFi configuration functions if supported
  // Here, assuming default channel setting, as direct channel setting is complex in Arduino SDK

// Connect to WiFi network
  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("\nWiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());

// Start the server
  server.begin();
}

void loop() {
  // Read serial monitor status
  if (Serial.available()) {
    serialStatus = Serial.readStringUntil('\n');
  }
  // Check if a client has connected
  WiFiClient client = server.available();
  if (client) {
    Serial.println("New Client.");
    String currentLine = "";
    while (client.connected()) {
      if (client.available()) {
        char c = client.read();
        Serial.write(c);
        if (c == '\n') {
          // if the current line is blank, you got two newline characters in a row.
          if (currentLine.length() == 0) {
            // send a standard HTTP response
            client.println("HTTP/1.1 200 OK");
            client.println("Content-type:text/html");
            client.println(); // end HTTP headers
            client.println("<html>");
            client.println("<head><title>ESP32 WiFi Jammer Control</title></head>");
            client.println("<body><h1>Control the WiFi Jammer</h1>");
            client.println("<p>Status from Serial Monitor: ");
            client.println(serialStatus);
            client.println("</p>");
            client.println("</body></html>");
            break;
          } else {
            currentLine = "";
          }
        } else if (c != '\r') {
          currentLine += c;
        }
      }
    }
    // close connection
    client.stop();
    Serial.println("Client Disconnected.");
  }
}

/* END CODE */