Revise paste "Random Colors" rev_05

/********* Pleasedontcode.com **********

Pleasedontcode thanks you for automatic code generation! Enjoy your code!

- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

- Project: "Random Colors"
	- Source Code NOT compiled for: Arduino Uno
	- Source Code created on: 2024-09-02 15:05:09

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* fix the code. */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <Adafruit_NeoPixel.h> // Include the NeoPixel library

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void rndRed();
void rndBlue();
void rndGreen();
void rndPurple();

/****** CONSTANTS AND VARIABLES *****/
#define PIN        6
#define NUMPIXELS 15
Adafruit_NeoPixel pixels(NUMPIXELS, PIN, NEO_GRBW + NEO_KHZ800);

const int btnRed = 2;    // the pin that the pushbutton is attached to
const int btnBlue = 3;   // the pin that the pushbutton is attached to
const int btnGreen = 4;  // the pin that the pushbutton is attached to
const int btnPurple = 5; // the pin that the pushbutton is attached to

void setup(void)
{
    randomSeed(analogRead(A0)); // Seed the random number generator with noise from analog pin A0
    
    // Set button pins as input
    pinMode(btnRed, INPUT);
    pinMode(btnBlue, INPUT);
    pinMode(btnGreen, INPUT);
    pinMode(btnPurple, INPUT);

// Initialize serial communication:
    Serial.begin(9600);
    
    // Initialize the NeoPixel strip
    pixels.begin(); // INITIALIZE NeoPixel strip object (REQUIRED)
    pixels.clear(); // Set all pixel colors to 'off'
    pixels.show();  // Update the strip to show the changes
    delay(1000);    // Wait for a second
}

void loop(void)
{
    // Check the state of each button and call the corresponding function if pressed
    if (digitalRead(btnRed) == HIGH) {
        rndRed(); // Call function to light up a random red pixel
        delay(100); // Debounce delay
    }

if (digitalRead(btnBlue) == HIGH) {
        rndBlue(); // Call function to light up a random blue pixel
        delay(100); // Debounce delay
    }

if (digitalRead(btnGreen) == HIGH) {
        rndGreen(); // Call function to light up a random green pixel
        delay(100); // Debounce delay
    }

if (digitalRead(btnPurple) == HIGH) {
        rndPurple(); // Call function to light up a random purple pixel
        delay(100); // Debounce delay
    }
}

void rndRed() {
    int led = random(0, NUMPIXELS); // Use NUMPIXELS constant for random range
    pixels.setPixelColor(led, pixels.Color(255, 0, 0, 0)); // Set the pixel to red
    pixels.show();   // Send the updated pixel colors to the hardware.
    delay(500);      // Wait for half a second
}

void rndBlue() {
    int led = random(0, NUMPIXELS); // Use NUMPIXELS constant for random range
    pixels.setPixelColor(led, pixels.Color(0, 0, 255, 0)); // Set the pixel to blue
    pixels.show();   // Send the updated pixel colors to the hardware.
    delay(500);      // Wait for half a second
}

void rndGreen() {
    int led = random(0, NUMPIXELS); // Use NUMPIXELS constant for random range
    pixels.setPixelColor(led, pixels.Color(0, 255, 0, 0)); // Set the pixel to green
    pixels.show();   // Send the updated pixel colors to the hardware.
    delay(500);      // Wait for half a second
}

void rndPurple() {
    int led = random(0, NUMPIXELS); // Use NUMPIXELS constant for random range
    pixels.setPixelColor(led, pixels.Color(171, 0, 255, 0)); // Set the pixel to purple
    pixels.show();   // Send the updated pixel colors to the hardware.
    delay(500);      // Wait for half a second
}

/* END CODE */