Revise paste Button Control rev_01

/********* Pleasedontcode.com **********

Pleasedontcode thanks you for automatic code generation! Enjoy your code!

- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

- Project: Button Control
	- Source Code compiled for: Arduino Uno
	- Source Code created on: 2024-03-11 11:24:38

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* I want to use two relays for the left and right of */
	/* a tilt motor. Inside this motor, there is a 10 */
	/* kOhm potentiometer, which changes the position of */
	/* this motor according to the command that is being */
	/* executed. I will divide the right side of this */
	/* engin */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <EasyButton.h>    //https://github.com/evert-arias/EasyButton

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t Btn1_PushButton_PIN_D2 = 2;
const uint8_t Btn2_PushButton_PIN_D3 = 3;

/***** DEFINITION OF ANALOG INPUT PINS *****/
const uint8_t Pot_Potentiometer_Vout_PIN_A0 = A0;

/****** DEFINITION OF LIBRARY CLASS INSTANCES*****/
EasyButton Btn1_PushButton(Btn1_PushButton_PIN_D2);
EasyButton Btn2_PushButton(Btn2_PushButton_PIN_D3);

void setup(void)
{
    // put your setup code here, to run once:

pinMode(Btn1_PushButton_PIN_D2, INPUT_PULLUP);
    pinMode(Btn2_PushButton_PIN_D3, INPUT_PULLUP);
    pinMode(Pot_Potentiometer_Vout_PIN_A0, INPUT);

}

void loop(void)
{
    // put your main code here, to run repeatedly:

// Check the state of Btn1_PushButton
    Btn1_PushButton.read();
    if (Btn1_PushButton.isPressed())
    {
        // Perform the left tilt motor action
    }

// Check the state of Btn2_PushButton
    Btn2_PushButton.read();
    if (Btn2_PushButton.isPressed())
    {
        // Perform the right tilt motor action
    }

// Read the value of the potentiometer
    int potValue = analogRead(Pot_Potentiometer_Vout_PIN_A0);
    // Perform actions based on the potentiometer value

}