Revise paste LED Control rev_02

/********* Pleasedontcode.com **********

Pleasedontcode thanks you for automatic code generation! Enjoy your code!

- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

- Project: LED Control
	- Source Code NOT compiled for: Arduino Uno
	- Source Code created on: 2024-11-02 06:30:47

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* control red led connecter to pin D2 , the led */
	/* switch on 2second then switch off after that the */
	/* second green led switch on then wait 2 second then */
	/* switch off */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void updateOutputs(void);

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t led_LED_PIN_D2 = 2; // Red LED connected to pin D2
const uint8_t green_led_LED_PIN_D3 = 3; // Green LED connected to pin D3

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
/***** used to store raw data *****/
bool led_LED_PIN_D2_rawData = 0; // Initial state for Red LED
bool green_led_LED_PIN_D3_rawData = 0; // Initial state for Green LED

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
/***** used to store data after characteristic curve transformation *****/
float led_LED_PIN_D2_phyData = 0.0;
float green_led_LED_PIN_D3_phyData = 0.0;

void setup(void)
{
	// Initialize the digital pins as outputs
	pinMode(led_LED_PIN_D2, OUTPUT);
	pinMode(green_led_LED_PIN_D3, OUTPUT);
}

void loop(void)
{
	// Control the Red LED
	led_LED_PIN_D2_rawData = true; // Turn on Red LED
	updateOutputs(); // Refresh output data
	delay(2000); // Wait for 2 seconds

led_LED_PIN_D2_rawData = false; // Turn off Red LED
	updateOutputs(); // Refresh output data

// Control the Green LED
	green_led_LED_PIN_D3_rawData = true; // Turn on Green LED
	updateOutputs(); // Refresh output data
	delay(2000); // Wait for 2 seconds

green_led_LED_PIN_D3_rawData = false; // Turn off Green LED
	updateOutputs(); // Refresh output data
	delay(2000); // Wait for 2 seconds
}

void updateOutputs()
{
	// Update the state of the LEDs
	digitalWrite(led_LED_PIN_D2, led_LED_PIN_D2_rawData);
	digitalWrite(green_led_LED_PIN_D3, green_led_LED_PIN_D3_rawData);
}

/* END CODE */