Revise paste Ultrasonic Indicator rev_01

/********* Pleasedontcode.com **********

Pleasedontcode thanks you for automatic code generation! Enjoy your code!

- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

- Project: Ultrasonic Indicator
	- Source Code compiled for: Arduino Uno
	- Source Code created on: 2024-04-17 14:09:14

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* water level indicator */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <Ultrasonic.h> // https://github.com/ErickSimoes/Ultrasonic

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void updateOutputs(void);
void checkWaterLevel(unsigned int distance);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t US_HC_SR04_Echo_PIN_D3 = 3;

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t US_HC_SR04_Trigger_PIN_D2 = 2;
const uint8_t WATER_LEVEL_INDICATOR_PIN = 4;

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
/***** used to store raw data *****/
bool US_HC_SR04_Trigger_PIN_D2_rawData = 0;

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
/***** used to store data after characteristic curve transformation *****/
float US_HC_SR04_Trigger_PIN_D2_phyData = 0.0;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
Ultrasonic ultrasonic(US_HC_SR04_Trigger_PIN_D2, US_HC_SR04_Echo_PIN_D3);

void setup(void)
{
  // put your setup code here, to run once:
  pinMode(US_HC_SR04_Echo_PIN_D3, INPUT);
  pinMode(US_HC_SR04_Trigger_PIN_D2, OUTPUT);
  pinMode(WATER_LEVEL_INDICATOR_PIN, OUTPUT);
  Serial.begin(9600); // Initialize serial communication
}

void loop(void)
{
  // put your main code here, to run repeatedly:
  updateOutputs(); // Refresh output data

// Read distance from ultrasonic sensor
  unsigned int distance = ultrasonic.read();

// Print distance in centimeters
  Serial.print("Distance in CM: ");
  Serial.println(distance);

// Check water level and update the indicator
  checkWaterLevel(distance);

delay(1000);
}

void updateOutputs(void)
{
  digitalWrite(US_HC_SR04_Trigger_PIN_D2, US_HC_SR04_Trigger_PIN_D2_rawData);
}

void checkWaterLevel(unsigned int distance)
{
  // Define the threshold distance for water level
  const unsigned int WATER_LEVEL_THRESHOLD = 10;

if (distance <= WATER_LEVEL_THRESHOLD)
  {
    // Water level is low, turn on the indicator
    digitalWrite(WATER_LEVEL_INDICATOR_PIN, HIGH);
  }
  else
  {
    // Water level is normal, turn off the indicator
    digitalWrite(WATER_LEVEL_INDICATOR_PIN, LOW);
  }
}