Revise paste **Color Control** rev_01

/********* Pleasedontcode.com **********

Pleasedontcode thanks you for automatic code generation! Enjoy your code!

- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

- Project: **Color Control**
	- Source Code NOT compiled for: Arduino Uno
	- Source Code created on: 2024-11-27 10:40:23

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* Photoresistor and rgb led with 5 colours */
/****** END SYSTEM REQUIREMENTS *****/

/* START CODE */

/****** DEFINITION OF LIBRARIES *****/
#include <Arduino.h>
#include <Wire.h>
#include <Adafruit_NeoPixel.h>

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void updateOutputs(); // Added prototype for updateOutputs function
void colours(int R_value, int G_value, int B_value); // Added prototype for colours function

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t Photoresistorandrgbled_LEDRGB_Red_PIN_D2		= 2;
const uint8_t Photoresistorandrgbled_LEDRGB_Green_PIN_D3		= 3;
const uint8_t Photoresistorandrgbled_LEDRGB_Blue_PIN_D4		= 4;

// USER CODE PINS
const uint8_t RED_PIN = 9; // Changed variable name for clarity
const uint8_t GREEN_PIN = 10; // Changed variable name for clarity
const uint8_t BLUE_PIN = 11; // Changed variable name for clarity
const uint8_t LDR_PIN = A0; // Changed variable name for clarity

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
/***** used to store raw data *****/
bool	Photoresistorandrgbled_LEDRGB_Red_PIN_D2_rawData		= 0;
bool	Photoresistorandrgbled_LEDRGB_Green_PIN_D3_rawData		= 0;
bool	Photoresistorandrgbled_LEDRGB_Blue_PIN_D4_rawData		= 0;

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
/***** used to store data after characteristic curve transformation *****/
float	Photoresistorandrgbled_LEDRGB_Red_PIN_D2_phyData		= 0.0;
float	Photoresistorandrgbled_LEDRGB_Green_PIN_D3_phyData		= 0.0;
float	Photoresistorandrgbled_LEDRGB_Blue_PIN_D4_phyData		= 0.0;

int LDRvalue = 0; // Added variable for LDR value

void setup(void)
{
	// put your setup code here, to run once:

pinMode(Photoresistorandrgbled_LEDRGB_Red_PIN_D2,	 OUTPUT);
	pinMode(Photoresistorandrgbled_LEDRGB_Green_PIN_D3,	 OUTPUT);
	pinMode(Photoresistorandrgbled_LEDRGB_Blue_PIN_D4,	 OUTPUT);
	
	// USER CODE SETUP
	Serial.begin(9600);
	pinMode(RED_PIN, OUTPUT); 
	pinMode(BLUE_PIN, OUTPUT); 
	pinMode(GREEN_PIN, OUTPUT);  
}

void loop(void)
{
	// put your main code here, to run repeatedly:

updateOutputs(); // Refresh output data

// USER CODE LOGIC
	LDRvalue = analogRead(LDR_PIN); // Read the LDR value

if (LDRvalue < 250)
	{
		digitalWrite(RED_PIN, HIGH);
		delay(300);
	}
	else
	{
		digitalWrite(RED_PIN, LOW);
	}

Serial.print("Photoresistor value: ");
	Serial.println(LDRvalue);
	delay(100);

colours(255, 0, 0); // RED 
	delay(1000); 
	colours(0, 255, 0); // GREEN 
	delay(1000); 
	colours(0, 0, 255); // BLUE 
	delay(1000); 
	colours(255, 0, 255); // MAGENTA 
	delay(1000); 
	colours(255, 255, 0); // YELLOW
	delay(1000); 
}

void updateOutputs()
{
	digitalWrite(Photoresistorandrgbled_LEDRGB_Red_PIN_D2, Photoresistorandrgbled_LEDRGB_Red_PIN_D2_rawData);
	digitalWrite(Photoresistorandrgbled_LEDRGB_Green_PIN_D3, Photoresistorandrgbled_LEDRGB_Green_PIN_D3_rawData);
	digitalWrite(Photoresistorandrgbled_LEDRGB_Blue_PIN_D4, Photoresistorandrgbled_LEDRGB_Blue_PIN_D4_rawData);
}

void colours(int R_value, int G_value, int B_value)   
{ 
	analogWrite(RED_PIN, R_value); 
	analogWrite(GREEN_PIN, G_value); 
	analogWrite(BLUE_PIN, B_value); 
}

/* END CODE */