Revise paste "Relay Control" rev_01

/********* Pleasedontcode.com **********

Pleasedontcode thanks you for automatic code generation! Enjoy your code!

- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

- Project: "Relay Control"
	- Source Code NOT compiled for: ESP32 DevKit V1
	- Source Code created on: 2024-05-28 09:48:47

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* Designer home automation system in which the ESP */
	/* 32 is able to control 9 relays with using ESP */
	/* RainMaker application and from also control by */
	/* manual switches. */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <Relay.h>  //https://github.com/rafaelnsantos/Relay

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void updateOutputs(void);

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t Relaymodule_RelayModule_Signal_PIN_D4  = 4;
const uint8_t Relaymodule_RelayModule_Signal_PIN_D13 = 13;
const uint8_t Relaymodule_RelayModule_Signal_PIN_D14 = 14;
const uint8_t Relaymodule_RelayModule_Signal_PIN_D15 = 15;
const uint8_t Relaymodule_RelayModule_Signal_PIN_D16 = 16;
const uint8_t Relaymodule_RelayModule_Signal_PIN_D17 = 17;
const uint8_t Relaymodule_RelayModule_Signal_PIN_D18 = 18;
const uint8_t Relaymodule_RelayModule_Signal_PIN_D19 = 19;
const uint8_t Relaymodule_RelayModule_Signal_PIN_D21 = 21;

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
/***** used to store raw data *****/
bool Relaymodule_RelayModule_Signal_PIN_D4_rawData  = 0;
bool Relaymodule_RelayModule_Signal_PIN_D13_rawData = 0;
bool Relaymodule_RelayModule_Signal_PIN_D14_rawData = 0;
bool Relaymodule_RelayModule_Signal_PIN_D15_rawData = 0;
bool Relaymodule_RelayModule_Signal_PIN_D16_rawData = 0;
bool Relaymodule_RelayModule_Signal_PIN_D17_rawData = 0;
bool Relaymodule_RelayModule_Signal_PIN_D18_rawData = 0;
bool Relaymodule_RelayModule_Signal_PIN_D19_rawData = 0;
bool Relaymodule_RelayModule_Signal_PIN_D21_rawData = 0;

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
/***** used to store data after characteristic curve transformation *****/
float Relaymodule_RelayModule_Signal_PIN_D4_phyData  = 0.0;
float Relaymodule_RelayModule_Signal_PIN_D13_phyData = 0.0;
float Relaymodule_RelayModule_Signal_PIN_D14_phyData = 0.0;
float Relaymodule_RelayModule_Signal_PIN_D15_phyData = 0.0;
float Relaymodule_RelayModule_Signal_PIN_D16_phyData = 0.0;
float Relaymodule_RelayModule_Signal_PIN_D17_phyData = 0.0;
float Relaymodule_RelayModule_Signal_PIN_D18_phyData = 0.0;
float Relaymodule_RelayModule_Signal_PIN_D19_phyData = 0.0;
float Relaymodule_RelayModule_Signal_PIN_D21_phyData = 0.0;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
Relay relayD4(Relaymodule_RelayModule_Signal_PIN_D4, true);   // Initialize relay on pin 4, Normally Open
Relay relayD13(Relaymodule_RelayModule_Signal_PIN_D13, true); // Initialize relay on pin 13, Normally Open
Relay relayD14(Relaymodule_RelayModule_Signal_PIN_D14, true); // Initialize relay on pin 14, Normally Open
Relay relayD15(Relaymodule_RelayModule_Signal_PIN_D15, true); // Initialize relay on pin 15, Normally Open
Relay relayD16(Relaymodule_RelayModule_Signal_PIN_D16, true); // Initialize relay on pin 16, Normally Open
Relay relayD17(Relaymodule_RelayModule_Signal_PIN_D17, true); // Initialize relay on pin 17, Normally Open
Relay relayD18(Relaymodule_RelayModule_Signal_PIN_D18, true); // Initialize relay on pin 18, Normally Open
Relay relayD19(Relaymodule_RelayModule_Signal_PIN_D19, true); // Initialize relay on pin 19, Normally Open
Relay relayD21(Relaymodule_RelayModule_Signal_PIN_D21, true); // Initialize relay on pin 21, Normally Open

void setup(void)
{
  // put your setup code here, to run once:
  
  relayD4.begin();  // Initialize the relay on pin 4
  relayD13.begin(); // Initialize the relay on pin 13
  relayD14.begin(); // Initialize the relay on pin 14
  relayD15.begin(); // Initialize the relay on pin 15
  relayD16.begin(); // Initialize the relay on pin 16
  relayD17.begin(); // Initialize the relay on pin 17
  relayD18.begin(); // Initialize the relay on pin 18
  relayD19.begin(); // Initialize the relay on pin 19
  relayD21.begin(); // Initialize the relay on pin 21
}

void loop(void)
{
  // put your main code here, to run repeatedly:

updateOutputs(); // Refresh output data
}

void updateOutputs()
{
  // Update the state of each relay based on the raw data
  if (Relaymodule_RelayModule_Signal_PIN_D4_rawData)
    relayD4.turnOn();
  else
    relayD4.turnOff();

if (Relaymodule_RelayModule_Signal_PIN_D13_rawData)
    relayD13.turnOn();
  else
    relayD13.turnOff();

if (Relaymodule_RelayModule_Signal_PIN_D14_rawData)
    relayD14.turnOn();
  else
    relayD14.turnOff();

if (Relaymodule_RelayModule_Signal_PIN_D15_rawData)
    relayD15.turnOn();
  else
    relayD15.turnOff();

if (Relaymodule_RelayModule_Signal_PIN_D16_rawData)
    relayD16.turnOn();
  else
    relayD16.turnOff();

if (Relaymodule_RelayModule_Signal_PIN_D17_rawData)
    relayD17.turnOn();
  else
    relayD17.turnOff();

if (Relaymodule_RelayModule_Signal_PIN_D18_rawData)
    relayD18.turnOn();
  else
    relayD18.turnOff();

if (Relaymodule_RelayModule_Signal_PIN_D19_rawData)
    relayD19.turnOn();
  else
    relayD19.turnOff();

if (Relaymodule_RelayModule_Signal_PIN_D21_rawData)
    relayD21.turnOn();
  else
    relayD21.turnOff();
}

/* END CODE */