Revise paste Relay Control rev_01

/********* Pleasedontcode.com **********

Pleasedontcode thanks you for automatic code generation! Enjoy your code!

- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

- Project: Relay Control
	- Source Code NOT compiled for: Arduino Uno
	- Source Code created on: 2024-10-20 13:41:40

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* turns on relay when button is pushed */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <EasyButton.h>	//https://github.com/evert-arias/EasyButton
#include <Relay.h>	//https://github.com/rafaelnsantos/Relay

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t Switch1_PushButton_PIN_D2		= 2;

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t Relay1_RelayModule_Signal_PIN_D3		= 3;

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
bool Relay1_RelayModule_Signal_PIN_D3_rawData		= false; // Initialize as false (relay off)

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
// Instance of the EasyButton for the push button
EasyButton button(Switch1_PushButton_PIN_D2); // Initialize EasyButton with the push button pin
// Instance of the Relay for the relay module
Relay relay(Relay1_RelayModule_Signal_PIN_D3, true); // Initialize Relay with the relay pin and Normally Open configuration

void setup(void)
{
	Serial.begin(115200); // Initialize Serial for debugging
	Serial.println("Setup started");

pinMode(Switch1_PushButton_PIN_D2, INPUT_PULLUP); // Set the push button pin as input with pull-up
	pinMode(Relay1_RelayModule_Signal_PIN_D3, OUTPUT); // Set the relay pin as output

// Initialize the button
	button.begin(); // Start the EasyButton
	button.onPressed([]() { // Lambda function for button press event
		Serial.println("Button pressed");
		Relay1_RelayModule_Signal_PIN_D3_rawData = true; // Set relay state to on
		updateOutputs(); // Refresh output data
	});
}

void loop(void)
{
	button.read(); // Continuously read the status of the button
	relay.loop(); // Call relay loop to manage relay timing
}

void updateOutputs()
{
	digitalWrite(Relay1_RelayModule_Signal_PIN_D3, Relay1_RelayModule_Signal_PIN_D3_rawData); // Update relay state
}

/* END CODE */