Revise paste "MPU6050 Initialization" rev_13

/********* Pleasedontcode.com **********

Pleasedontcode thanks you for automatic code generation! Enjoy your code!

- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

- Project: "MPU6050 Initialization"
	- Source Code compiled for: Arduino Mega
	- Source Code created on: 2024-06-22 05:51:59

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* convert mpu6050 data to ppm and send out for head */
	/* tracking */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <Wire.h>
#include <PPMEncoder.h>  //http://github.com/schinken/PPMEncoder
#include <MPU6050_6Axis_MotionApps20.h>  //https://github.com/jrowberg/i2cdevlib

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t gyro_MPU6050_Interrupt_PIN_D2 = 2;

/***** DEFINITION OF I2C PINS *****/
const uint8_t gyro_MPU6050_I2C_PIN_SDA_D20 = 20;
const uint8_t gyro_MPU6050_I2C_PIN_SCL_D21 = 21;
const uint8_t gyro_MPU6050_I2C_SLAVE_ADDRESS = 104;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
//PPMEncoder ppmEncoder;  // Removed this instantiation
MPU6050 mpu;  // Instantiate the MPU6050 object

/****** VARIABLES *****/
bool dmpReady = false;  // Set true if DMP init was successful
uint8_t mpuIntStatus;   // Holds actual interrupt status byte from MPU
uint8_t devStatus;      // Return status after each device operation (0 = success, !0 = error)
uint16_t packetSize;    // Expected DMP packet size (default is 42 bytes)
uint16_t fifoCount;     // Count of all bytes currently in FIFO
uint8_t fifoBuffer[64]; // FIFO storage buffer

Quaternion q;           // [w, x, y, z]         quaternion container
VectorFloat gravity;    // [x, y, z]            gravity vector
float ypr[3];           // [yaw, pitch, roll]   yaw/pitch/roll container and gravity vector

volatile bool mpuInterrupt = false;  // Indicates whether MPU interrupt pin has gone high

void dmpDataReady() {
    mpuInterrupt = true;
}

void setup(void) {
  // Initialize I2C
  Wire.begin();
  Wire.setClock(400000);  // 400kHz I2C clock

// Initialize serial communication
  Serial.begin(115200);
  while (!Serial);

// Initialize MPU6050
  Serial.println(F("Initializing I2C devices..."));
  mpu.initialize();
  pinMode(gyro_MPU6050_Interrupt_PIN_D2, INPUT);

// Verify connection
  Serial.println(F("Testing device connections..."));
  Serial.println(mpu.testConnection() ? F("MPU6050 connection successful") : F("MPU6050 connection failed"));

// Load and configure the DMP
  Serial.println(F("Initializing DMP..."));
  devStatus = mpu.dmpInitialize();

// Supply your own gyro offsets here, scaled for min sensitivity
  mpu.setXGyroOffset(220);
  mpu.setYGyroOffset(76);
  mpu.setZGyroOffset(-85);
  mpu.setZAccelOffset(1788); // 1688 factory default for my test chip

// Make sure it worked (returns 0 if so)
  if (devStatus == 0) {
      // Calibration Time: generate offsets and calibrate our MPU6050
      mpu.CalibrateAccel(6);
      mpu.CalibrateGyro(6);
      mpu.PrintActiveOffsets();
      Serial.println(F("Enabling DMP..."));
      mpu.setDMPEnabled(true);

// Enable Arduino interrupt detection
      Serial.print(F("Enabling interrupt detection (Arduino external interrupt "));
      Serial.print(digitalPinToInterrupt(gyro_MPU6050_Interrupt_PIN_D2));
      Serial.println(F(")..."));
      attachInterrupt(digitalPinToInterrupt(gyro_MPU6050_Interrupt_PIN_D2), dmpDataReady, RISING);
      mpuIntStatus = mpu.getIntStatus();

// Set our DMP ready flag
      Serial.println(F("DMP ready! Waiting for first interrupt..."));
      dmpReady = true;

// Get expected DMP packet size for later comparison
      packetSize = mpu.dmpGetFIFOPacketSize();
  } else {
      // ERROR!
      // 1 = initial memory load failed
      // 2 = DMP configuration updates failed
      // (if it's going to break, usually the code will be 1)
      Serial.print(F("DMP Initialization failed (code "));
      Serial.print(devStatus);
      Serial.println(F(")"));
  }

// Initialize the PPM encoder on pin 10
  ppmEncoder.begin(10);
}

void loop(void) {
  // If DMP is not ready, exit
  if (!dmpReady) return;

// Wait for MPU interrupt or extra packet(s) available
  while (!mpuInterrupt && fifoCount < packetSize) {
      // Do nothing
  }

// Reset interrupt flag and get INT_STATUS byte
  mpuInterrupt = false;
  mpuIntStatus = mpu.getIntStatus();

// Get current FIFO count
  fifoCount = mpu.getFIFOCount();

// Check for overflow (this should never happen unless our code is too inefficient)
  if ((mpuIntStatus & 0x10) || fifoCount == 1024) {
      // Reset so we can continue cleanly
      mpu.resetFIFO();
      Serial.println(F("FIFO overflow!"));

// Otherwise, check for DMP data ready interrupt (this should happen frequently)
  } else if (mpuIntStatus & 0x02) {
      // Wait for correct available data length, should be a VERY short wait
      while (fifoCount < packetSize) fifoCount = mpu.getFIFOCount();

// Read a packet from FIFO
      mpu.getFIFOBytes(fifoBuffer, packetSize);

// Track FIFO count here in case there is > 1 packet available
      // (this lets us immediately read more without waiting for an interrupt)
      fifoCount -= packetSize;

// Get Yaw, Pitch, and Roll values
      mpu.dmpGetQuaternion(&q, fifoBuffer);
      mpu.dmpGetGravity(&gravity, &q);
      mpu.dmpGetYawPitchRoll(ypr, &q, &gravity);

// Convert Yaw, Pitch, and Roll to PPM signals
      int yawPPM = map(ypr[0] * 180/M_PI, -180, 180, PPMEncoder::MIN, PPMEncoder::MAX);
      int pitchPPM = map(ypr[1] * 180/M_PI, -180, 180, PPMEncoder::MIN, PPMEncoder::MAX);
      int rollPPM = map(ypr[2] * 180/M_PI, -180, 180, PPMEncoder::MIN, PPMEncoder::MAX);

// Set PPM channels
      ppmEncoder.setChannel(0, yawPPM);
      ppmEncoder.setChannel(1, pitchPPM);
      ppmEncoder.setChannel(2, rollPPM);

// Print Yaw, Pitch, and Roll values for debugging
      Serial.print("ypr\t");
      Serial.print(ypr[0] * 180/M_PI);
      Serial.print("\t");
      Serial.print(ypr[1] * 180/M_PI);
      Serial.print("\t");
      Serial.println(ypr[2] * 180/M_PI);
  }
}

/* END CODE */