Revise paste **GPS Communication** rev_01

/********* Pleasedontcode.com **********

Pleasedontcode thanks you for automatic code generation! Enjoy your code!

- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

- Project: **GPS Communication**
	- Source Code NOT compiled for: Arduino Nano
	- Source Code created on: 2024-11-28 02:53:38

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* Show real time gps on map */
/****** END SYSTEM REQUIREMENTS *****/

/* START CODE */

/****** DEFINITION OF LIBRARIES *****/
#include <SoftwareSerial.h>
#include <Sim800L.h>	//https://github.com/vittorioexp/Sim800L-Arduino-Library-revised
#include <TinyGPS++.h> // Include TinyGPS++ library for GPS functionality

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void updateOutputs();
void fetchGPSData(); // Function to fetch GPS data

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t Kkk_SIM800L_RING_PIN_D3		= 3;

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t Kkk_SIM800L_RST_PIN_D2		= 2;
const uint8_t Kkk_SIM800L_DTR_PIN_D4		= 4;

/***** DEFINITION OF Software Serial *****/
const uint8_t Kkk_SIM800L_Serial_PIN_SERIAL_TX_A0		= A0;
const uint8_t Kkk_SIM800L_Serial_PIN_SERIAL_RX_A1		= A1;
SoftwareSerial Kkk_SIM800L_Serial(Kkk_SIM800L_Serial_PIN_SERIAL_RX_A1, Kkk_SIM800L_Serial_PIN_SERIAL_TX_A0);

// Define GPS Serial
const uint8_t GPS_SERIAL_TX_PIN = A2; // TX pin for GPS
const uint8_t GPS_SERIAL_RX_PIN = A3; // RX pin for GPS
SoftwareSerial GPS_Serial(GPS_SERIAL_RX_PIN, GPS_SERIAL_TX_PIN); // Create a SoftwareSerial object for GPS

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
bool	Kkk_SIM800L_RST_PIN_D2_rawData		= 0;
bool	Kkk_SIM800L_DTR_PIN_D4_rawData		= 0;

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
float	Kkk_SIM800L_RST_PIN_D2_phyData		= 0.0;
float	Kkk_SIM800L_DTR_PIN_D4_phyData		= 0.0;

// Create a TinyGPS++ object
TinyGPSPlus gps;

void setup(void)
{
	// put your setup code here, to run once:

pinMode(Kkk_SIM800L_RING_PIN_D3,	INPUT_PULLUP);

pinMode(Kkk_SIM800L_RST_PIN_D2,	 OUTPUT);
	pinMode(Kkk_SIM800L_DTR_PIN_D4,	 OUTPUT);

Kkk_SIM800L_Serial.begin(9600);
	GPS_Serial.begin(9600); // Start GPS serial communication

}

void loop(void)
{
	// put your main code here, to run repeatedly:

updateOutputs(); // Refresh output data
	fetchGPSData(); // Fetch GPS data and update

}

void updateOutputs()
{
	digitalWrite(Kkk_SIM800L_RST_PIN_D2, Kkk_SIM800L_RST_PIN_D2_rawData);
	digitalWrite(Kkk_SIM800L_DTR_PIN_D4, Kkk_SIM800L_DTR_PIN_D4_rawData);
}

void fetchGPSData() {
	while (GPS_Serial.available()) {
		gps.encode(GPS_Serial.read()); // Read data from GPS
	}

if (gps.location.isUpdated()) {
		// If GPS location is updated, you can now use gps.location.lat() and gps.location.lng()
		float latitude = gps.location.lat();
		float longitude = gps.location.lng();
		// Here you can implement code to show the GPS coordinates on a map
		// For example, you can send these coordinates via SIM800L to a server
	}
}

/* END CODE */