Revise paste 2_servo_wireless rev_01

/********* Pleasedontcode.com **********

Pleasedontcode thanks you for automatic code generation! Enjoy your code!

- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

- Project: 2_servo_wireless
	- Source Code compiled for: Arduino Uno
	- Source Code created on: 2023-10-20 07:54:39
	- Source Code generated by: Lohith bala

********* Pleasedontcode.com **********/
/****** DEFINITION OF LIBRARIES *****/
#include <Arduino.h>
#include <EasyButton.h>
#include <Servo.h>

/****** SYSTEM REQUIREMENT 1 *****/
/* Should be able to manually control the servo using */
/* potentiometer */

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t Lava_PushButton_PIN_D2 = 2; // Define the pin number for the push button

/***** DEFINITION OF ANALOG INPUT PINS *****/
const uint8_t Potentiometer_PIN_A0 = A0; // Define the pin number for the potentiometer

/***** DEFINITION OF SERVO OUTPUT PINS *****/
const uint8_t Servo_PIN_D9 = 9; // Define the pin number for the servo

/***** GLOBAL VARIABLES *****/
Servo servo; // Create a servo object

void setup(void)
{
  // put your setup code here, to run once:

pinMode(Lava_PushButton_PIN_D2, INPUT_PULLUP); // Set the push button pin as input with internal pull-up resistor

servo.attach(Servo_PIN_D9); // Attach the servo to the servo pin
}

void loop(void)
{
  // put your main code here, to run repeatedly:

int potValue = analogRead(Potentiometer_PIN_A0); // Read the analog value from the potentiometer
  int servoPos = map(potValue, 0, 1023, 0, 180); // Map the potentiometer value to servo position (0-180 degrees)

servo.write(servoPos); // Set the servo position based on the potentiometer value

delay(10); // Delay for stability
}