/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: **Health Monitor**
	- Source Code NOT compiled for: Arduino Nano ESP32
	- Source Code created on: 2024-10-13 10:28:41

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* Read temperature from DS18B20 sensor and display */
	/* on LCD screen. */
/****** SYSTEM REQUIREMENT 2 *****/
	/* Perform a countdown of 10 seconds after each */
	/* temperature reading using LiquidCrystal library */
	/* for display control. */
/****** SYSTEM REQUIREMENT 3 *****/
	/* use max pulse oximeter */
/****** SYSTEM REQUIREMENT 4 *****/
	/* use non blocking code. */
/****** END SYSTEM REQUIREMENTS *****/

/* START CODE */

/****** DEFINITION OF LIBRARIES *****/
#include <Wire.h>
#include <DS18B20.h>	//https://github.com/matmunk/DS18B20
#include <LiquidCrystal.h>	//https://github.com/arduino-libraries/LiquidCrystal
#include <DHT.h>	//https://github.com/adafruit/DHT-sensor-library
#include <MAX30100_PulseOximeter.h>	//https://github.com/gabriel-milan/Arduino-MAX30100

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void updateOutputs();
void readTemperature();
void displayCountdown(int seconds);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t temperatureSensor_DHT22_DOUT_PIN_D9		= 9;
const uint8_t PulseOximeter_MAX30100_INT_PIN_D2		= 2;
const uint8_t temperatureSensor_DS18B20_DQ_PIN_D4		= 4;

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t myLCD_LCD1602_RS_PIN_D3		= 3;
const uint8_t myLCD_LCD1602_E_PIN_D5		= 5;
const uint8_t myLCD_LCD1602_D4_PIN_D6		= 6;
const uint8_t myLCD_LCD1602_D5_PIN_D7		= 7;
const uint8_t myLCD_LCD1602_D6_PIN_D8		= 8;
const uint8_t myLCD_LCD1602_D7_PIN_D10		= 10;

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
bool	myLCD_LCD1602_RS_PIN_D3_rawData		= 0;
bool	myLCD_LCD1602_E_PIN_D5_rawData		= 0;
bool	myLCD_LCD1602_D4_PIN_D6_rawData		= 0;
bool	myLCD_LCD1602_D5_PIN_D7_rawData		= 0;
bool	myLCD_LCD1602_D6_PIN_D8_rawData		= 0;
bool	myLCD_LCD1602_D7_PIN_D10_rawData		= 0;

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
float	myLCD_LCD1602_RS_PIN_D3_phyData		= 0.0;
float	myLCD_LCD1602_E_PIN_D5_phyData		= 0.0;
float	myLCD_LCD1602_D4_PIN_D6_phyData		= 0.0;
float	myLCD_LCD1602_D5_PIN_D7_phyData		= 0.0;
float	myLCD_LCD1602_D6_PIN_D8_phyData		= 0.0;
float	myLCD_LCD1602_D7_PIN_D10_phyData		= 0.0;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
// DS18B20 temperature sensor instance
DS18B20 ds(temperatureSensor_DS18B20_DQ_PIN_D4);
// LiquidCrystal instance
LiquidCrystal lcd(myLCD_LCD1602_RS_PIN_D3, myLCD_LCD1602_E_PIN_D5, myLCD_LCD1602_D4_PIN_D6, myLCD_LCD1602_D5_PIN_D7, myLCD_LCD1602_D6_PIN_D8, myLCD_LCD1602_D7_PIN_D10);
// MAX30100 pulse oximeter instance
PulseOximeter pox;

unsigned long previousMillis = 0; // Store last time temperature was read
const long interval = 10000; // Interval to read temperature (10 seconds)
int countdown = 10; // Countdown timer

void setup(void)
{
	// Initialize pins
	pinMode(temperatureSensor_DHT22_DOUT_PIN_D9, INPUT_PULLUP);
	pinMode(PulseOximeter_MAX30100_INT_PIN_D2, INPUT_PULLUP);
	pinMode(temperatureSensor_DS18B20_DQ_PIN_D4, INPUT);

	pinMode(myLCD_LCD1602_RS_PIN_D3, OUTPUT);
	pinMode(myLCD_LCD1602_E_PIN_D5, OUTPUT);
	pinMode(myLCD_LCD1602_D4_PIN_D6, OUTPUT);
	pinMode(myLCD_LCD1602_D5_PIN_D7, OUTPUT);
	pinMode(myLCD_LCD1602_D6_PIN_D8, OUTPUT);
	pinMode(myLCD_LCD1602_D7_PIN_D10, OUTPUT);

	// Initialize the LCD
	lcd.begin(16, 2);
	// Initialize the pulse oximeter
	if (!pox.begin()) {
		lcd.print("MAX30100 Error");
		while (1);
	}
}

void loop(void)
{
	unsigned long currentMillis = millis();

	// Check if it's time to read the temperature
	if (currentMillis - previousMillis >= interval) {
		previousMillis = currentMillis; // Save the last time temperature was read
		readTemperature(); // Read temperature
		displayCountdown(countdown); // Display countdown
	}

	updateOutputs(); // Refresh output data
}

void readTemperature()
{
	float temperature = ds.getTempC(); // Get temperature in Celsius
	lcd.clear();
	lcd.print("Temp: ");
	lcd.print(temperature);
	lcd.print(" C");
}

void displayCountdown(int seconds)
{
	for (int i = seconds; i > 0; i--) {
		lcd.setCursor(0, 1); // Set cursor to second line
		lcd.print("Countdown: ");
		lcd.print(i);
		delay(1000); // Wait for 1 second
	}
	lcd.clear(); // Clear the display after countdown
}

void updateOutputs()
{
	// Update LCD display outputs
	digitalWrite(myLCD_LCD1602_RS_PIN_D3, myLCD_LCD1602_RS_PIN_D3_rawData);
	digitalWrite(myLCD_LCD1602_E_PIN_D5, myLCD_LCD1602_E_PIN_D5_rawData);
	digitalWrite(myLCD_LCD1602_D4_PIN_D6, myLCD_LCD1602_D4_PIN_D6_rawData);
	digitalWrite(myLCD_LCD1602_D5_PIN_D7, myLCD_LCD1602_D5_PIN_D7_rawData);
	digitalWrite(myLCD_LCD1602_D6_PIN_D8, myLCD_LCD1602_D6_PIN_D8_rawData);
	digitalWrite(myLCD_LCD1602_D7_PIN_D10, myLCD_LCD1602_D7_PIN_D10_rawData);
}

/* END CODE */