/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: **Sensor Data**
	- Source Code NOT compiled for: ESP32 DevKit V1
	- Source Code created on: 2024-11-08 07:16:01

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* The FISH_POND_MONITORING project aims to automate */
	/* fish pond monitoring by integrating sensors for */
	/* water quality, temperature, and fish activity, */
	/* ensuring optimal conditions for aquatic life. */
/****** END SYSTEM REQUIREMENTS *****/

/* START CODE */

/****** DEFINITION OF LIBRARIES *****/
#include     //https://github.com/hafidhh/FlowSensor-Arduino
#include            //https://github.com/adafruit/DHT-sensor-library

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t Water_flow_YF_S201_OUT_PIN_D4        = 4;
const uint8_t Temp_humidity_DHT11_DOUT_PIN_D13      = 13;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
// Flow sensor instance
FlowSensor flowSensor(1, Water_flow_YF_S201_OUT_PIN_D4); // Assuming type 1 for the flow sensor
// DHT sensor instance
DHT dht(Temp_humidity_DHT11_DOUT_PIN_D13, DHT11); // Using DHT11 for temperature and humidity

void setup(void)
{
    // Initialize serial communication for debugging
    Serial.begin(9600);
    
    // Initialize sensors
    flowSensor.begin(flowSensor.count);
    dht.begin();
    
    // Set pin modes
    pinMode(Water_flow_YF_S201_OUT_PIN_D4, INPUT);
    pinMode(Temp_humidity_DHT11_DOUT_PIN_D13, INPUT_PULLUP);
}

void loop(void)
{
    // Read flow rate and volume from the flow sensor
    flowSensor.read();
    float flowRate = flowSensor.getFlowRate_m(); // Get flow rate in liters/minute
    float volume = flowSensor.getVolume(); // Get total volume in liters

    // Read temperature and humidity from the DHT sensor
    float temperature = dht.readTemperature(); // Read temperature in Celsius
    float humidity = dht.readHumidity(); // Read humidity in percentage

    // Print sensor data to the Serial Monitor
    Serial.print("Flow Rate: ");
    Serial.print(flowRate);
    Serial.println(" L/min");
    
    Serial.print("Total Volume: ");
    Serial.print(volume);
    Serial.println(" L");
    
    Serial.print("Temperature: ");
    Serial.print(temperature);
    Serial.println(" °C");
    
    Serial.print("Humidity: ");
    Serial.print(humidity);
    Serial.println(" %");
    
    // Add a delay before the next reading
    delay(2000); // Delay for 2 seconds
}

/* END CODE */