/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: "SIM800L Management"
	- Source Code compiled for: ESP32 DevKit V1
	- Source Code created on: 2024-06-13 10:57:23

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* initialize gsm */
/****** END SYSTEM REQUIREMENTS *****/


/****** DEFINITION OF LIBRARIES *****/
#include  //https://github.com/plerup/espsoftwareserial
#include         //https://github.com/vittorioexp/Sim800L-Arduino-Library-revised

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void updateOutputs(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t sim_SIM800L_RING_PIN_D16 = 16;

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t sim_SIM800L_RST_PIN_D14 = 14;
const uint8_t sim_SIM800L_DTR_PIN_D17 = 17;

/***** DEFINITION OF Software Serial *****/
const uint8_t sim_SIM800L_Serial_PIN_SERIAL_TX_D4 = 4;
const uint8_t sim_SIM800L_Serial_PIN_SERIAL_RX_D13 = 13;
EspSoftwareSerial::UART sim_SIM800L_Serial;

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
/***** used to store raw data *****/
bool sim_SIM800L_RST_PIN_D14_rawData = 0;
bool sim_SIM800L_DTR_PIN_D17_rawData = 0;

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
/***** used to store data after characteristic curve transformation *****/
float sim_SIM800L_RST_PIN_D14_phyData = 0.0;
float sim_SIM800L_DTR_PIN_D17_phyData = 0.0;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
Sim800L GSM(sim_SIM800L_Serial_PIN_SERIAL_RX_D13, sim_SIM800L_Serial_PIN_SERIAL_TX_D4, sim_SIM800L_RST_PIN_D14);

void setup(void)
{
    // put your setup code here, to run once:
    pinMode(sim_SIM800L_RING_PIN_D16, INPUT_PULLUP);

    pinMode(sim_SIM800L_RST_PIN_D14, OUTPUT);
    pinMode(sim_SIM800L_DTR_PIN_D17, OUTPUT);

    sim_SIM800L_Serial.begin(9600, SWSERIAL_8N1, sim_SIM800L_Serial_PIN_SERIAL_RX_D13, sim_SIM800L_Serial_PIN_SERIAL_TX_D4, false);

    // Initialize GSM module with baud rate 9600
    GSM.begin(9600);

    Serial.begin(9600); // Initialize Serial for debugging

    // Debugging information
    Serial.println("GET PRODUCT INFO: ");
    Serial.println(GSM.getProductInfo());

    Serial.println("GET OPERATORS LIST: ");
    Serial.println(GSM.getOperatorsList());

    Serial.println("GET OPERATOR: ");
    Serial.println(GSM.getOperator());
}

void loop(void)
{
    // put your main code here, to run repeatedly:
    updateOutputs(); // Refresh output data
}

void updateOutputs()
{
    digitalWrite(sim_SIM800L_RST_PIN_D14, sim_SIM800L_RST_PIN_D14_rawData);
    digitalWrite(sim_SIM800L_DTR_PIN_D17, sim_SIM800L_DTR_PIN_D17_rawData);
}

/* END CODE */