/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: Distance Servo
	- Source Code compiled for: Arduino Uno
	- Source Code created on: 2024-02-14 01:10:05

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* the servo motor is underneath the ultrasonic and */
	/* rotates 90 degrees. Ultrasonic measures the */
	/* distance to an obstacle */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include     // https://github.com/ErickSimoes/Ultrasonic
#include          // https://github.com/arduino-libraries/Servo

/****** FUNCTION PROTOTYPES *****/
void setup();
void loop();
void updateOutputs();

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t ultrasonic_Echo_PIN = 3;

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t ultrasonic_Trigger_PIN = 2;

/***** DEFINITION OF PWM OUTPUT PINS *****/
const uint8_t servo_PWMSignal_PIN = 5;

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
bool ultrasonic_Trigger_PIN_rawData = false;
uint8_t servo_PWMSignal_PIN_rawData = 90; // Rotate at 90 degrees default

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
float ultrasonic_Trigger_PIN_phyData = 0.0;
float servo_PWMSignal_PIN_phyData = 0.0;

/****** DEFINITION OF LIBRARY CLASS INSTANCES *****/
Ultrasonic ultrasonic(ultrasonic_Trigger_PIN, ultrasonic_Echo_PIN);
Servo myservo;

void setup()
{
  // put your setup code here, to run once:
  pinMode(ultrasonic_Echo_PIN, INPUT);
  pinMode(ultrasonic_Trigger_PIN, OUTPUT);
  pinMode(servo_PWMSignal_PIN, OUTPUT);

  myservo.attach(servo_PWMSignal_PIN);
}

void loop()
{
  // put your main code here, to run repeatedly:
  ultrasonic_Trigger_PIN_rawData = true;
  delayMicroseconds(10);
  ultrasonic_Trigger_PIN_rawData = false;

  unsigned int distance_cm = ultrasonic.read();

  if (distance_cm > 0 && distance_cm < 100)
  {
    int angle = map(distance_cm, 0, 100, 0, 180);
    myservo.write(angle);
  }

  delay(200);
}