/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: **Sensor Data**
	- Source Code NOT compiled for: Arduino Uno
	- Source Code created on: 2024-11-28 23:59:14

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* The project must implement the LM35 sensor for */
	/* continuous temperature monitoring, with readings */
	/* taken from analog pin A0. The setup should include */
	/* necessary error handling for sensor malfunctions. */
/****** SYSTEM REQUIREMENT 2 *****/
	/* read gyroscope and accelerometer and print on */
	/* serial. */
/****** END SYSTEM REQUIREMENTS *****/

/* START CODE */

/****** DEFINITION OF LIBRARIES *****/
#include 
#include 	//https://github.com/wilmouths/LM35
#include 	//https://github.com/EmotiBit/EmotiBit_BMI160

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF ANALOG INPUT PINS *****/
const uint8_t temp_LM35_Vout_PIN_A0 = A0;

/***** DEFINITION OF I2C PINS *****/
const uint8_t accelerometer_BMI160_I2C_PIN_SDA_A4 = A4;
const uint8_t accelerometer_BMI160_I2C_PIN_SCL_A5 = A5;
const uint8_t accelerometer_BMI160_I2C_SLAVE_ADDRESS = 104;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
LM35 lm35(temp_LM35_Vout_PIN_A0); // Create LM35 object
BMI160GenClass BMI160; // Create BMI160 object

void setup(void)
{
    // Initialize serial communication
    Serial.begin(9600);
    
    // Initialize LM35 temperature sensor
    pinMode(temp_LM35_Vout_PIN_A0, INPUT);
    
    // Initialize BMI160 sensor
    if (!BMI160.begin(BMI160GenClass::I2C_MODE, Wire, accelerometer_BMI160_I2C_SLAVE_ADDRESS)) {
        Serial.println("BMI160 initialization failed!");
        while (1); // Halt if initialization fails
    }
}

void loop(void)
{
    // Read temperature from LM35
    double temperature = lm35.getTemp(); // Get temperature in Celsius
    Serial.print("Temperature: ");
    Serial.print(temperature);
    Serial.println(" °C");
    
    // Read gyroscope and accelerometer data from BMI160
    int16_t ax, ay, az; // Accelerometer data
    int16_t gx, gy, gz; // Gyroscope data
    
    BMI160.readAccelerometer(ax, ay, az);
    BMI160.readGyroscope(gx, gy, gz);
    
    // Print accelerometer data
    Serial.print("Accelerometer: ");
    Serial.print(" ax: "); Serial.print(ax);
    Serial.print(", ay: "); Serial.print(ay);
    Serial.print(", az: "); Serial.println(az);
    
    // Print gyroscope data
    Serial.print("Gyroscope: ");
    Serial.print(" gx: "); Serial.print(gx);
    Serial.print(", gy: "); Serial.print(gy);
    Serial.print(", gz: "); Serial.println(gz);
    
    // Delay before the next reading
    delay(1000); // Delay for 1 second
}

/* END CODE */