/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: **Keypad Control**
	- Source Code NOT compiled for: Arduino Nano ESP32
	- Source Code created on: 2024-10-06 09:23:11

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* The servo motor installed in the door will lock or */
	/* unlock based on the correct PIN code received by */
	/* the button. If the door is unlocked and the PIN is */
	/* correct, it will lock. If the door is locked and */
	/* the PIN is correct, it will unlock. */
/****** SYSTEM REQUIREMENT 2 *****/
	/* The webserver provides a web page about lock or */
	/* unlock state of the door. */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <Deneyap_Servo.h>	// https://github.com/deneyapkart/deneyap-servo-arduino-library
#include <Keypad.h>	// https://github.com/Chris--A/Keypad
#include <EasyButton.h>	// https://github.com/evert-arias/EasyButton
#include <LcdKeypad.h>	// https://github.com/dniklaus/arduino-display-lcdkeypad
#include <XYZrobotServo.h>	// https://github.com/pololu/xyzrobot-servo-arduino

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t keypad_Keypad3x4_R1_PIN_D4 = 4;
const uint8_t keypad_Keypad3x4_R2_PIN_D5 = 5;
const uint8_t keypad_Keypad3x4_R3_PIN_D6 = 6;
const uint8_t keypad_Keypad3x4_R4_PIN_D7 = 7;
const uint8_t pinButton_PushButton_PIN_D2 = 2;

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t keypad_Keypad3x4_C1_PIN_D8 = 8;
const uint8_t keypad_Keypad3x4_C2_PIN_D9 = 9;
const uint8_t keypad_Keypad3x4_C3_PIN_D10 = 10;

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
bool keypad_Keypad3x4_C1_PIN_D8_rawData = 0;
bool keypad_Keypad3x4_C2_PIN_D9_rawData = 0;
bool keypad_Keypad3x4_C3_PIN_D10_rawData = 0;

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
float keypad_Keypad3x4_C1_PIN_D8_phyData = 0.0;
float keypad_Keypad3x4_C2_PIN_D9_phyData = 0.0;
float keypad_Keypad3x4_C3_PIN_D10_phyData = 0.0;

const uint8_t KEYPAD3X4_ROWS = 4; // four rows
const uint8_t KEYPAD3X4_COLS = 3; // three columns
char Keys_Keypad3x4[KEYPAD3X4_ROWS][KEYPAD3X4_COLS] = {
    {'1', '2', '3'},
    {'4', '5', '6'},
    {'7', '8', '9'},
    {'*', '0', '#'},
};

/****** DEFINITION OF LIBRARIES CLASS INSTANCES *****/
LcdKeypad* myLcdKeypad = nullptr; // Declare LcdKeypad instance
MyLcdKeypadAdapter* myAdapter = nullptr; // Declare adapter instance

void setup(void)
{
    // put your setup code here, to run once:
    pinMode(keypad_Keypad3x4_R1_PIN_D4, INPUT_PULLUP);
    pinMode(keypad_Keypad3x4_R2_PIN_D5, INPUT_PULLUP);
    pinMode(keypad_Keypad3x4_R3_PIN_D6, INPUT_PULLUP);
    pinMode(keypad_Keypad3x4_R4_PIN_D7, INPUT_PULLUP);
    pinMode(pinButton_PushButton_PIN_D2, INPUT_PULLUP);

    pinMode(keypad_Keypad3x4_C1_PIN_D8, OUTPUT);
    pinMode(keypad_Keypad3x4_C2_PIN_D9, OUTPUT);
    pinMode(keypad_Keypad3x4_C3_PIN_D10, OUTPUT);

    // Initialize LcdKeypad and attach the adapter
    myLcdKeypad = new LcdKeypad();
    myAdapter = new MyLcdKeypadAdapter(myLcdKeypad);
    myLcdKeypad->attachAdapter(myAdapter);
}

void loop(void)
{
    // put your main code here, to run repeatedly:
    updateOutputs(); // Refresh output data
    myLcdKeypad->handleButtons(); // Handle button events
}

void updateOutputs()
{
    digitalWrite(keypad_Keypad3x4_C1_PIN_D8, keypad_Keypad3x4_C1_PIN_D8_rawData);
    digitalWrite(keypad_Keypad3x4_C2_PIN_D9, keypad_Keypad3x4_C2_PIN_D9_rawData);
    digitalWrite(keypad_Keypad3x4_C3_PIN_D10, keypad_Keypad3x4_C3_PIN_D10_rawData);
}

/* END CODE */