/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: Arduino Setup
	- Source Code compiled for: ESP32 DevKit V1
	- Source Code created on: 2024-01-15 14:36:10

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* if button is pressed so set out to 128. */
/****** SYSTEM REQUIREMENT 2 *****/
	/* read gps from spi and generate sinusoide signal if */
	/* position is moving. */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include 
#include 
#include 
#include 

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void updateOutputs(void);
void readGPS(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t butt_PushButton_PIN_D4 = 4;
const uint8_t ditpullup_PIN_D14 = 14;
const uint8_t ditpulldown_PIN_D16 = 16;
const uint8_t temp_DS18B20_DQ_PIN_D13 = 13;

/***** DEFINITION OF DAC OUTPUT PINS *****/
const uint8_t out_PIN_D25 = 25;

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
/***** used to store raw data *****/
uint8_t out_PIN_D25_rawData = 0;

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
/***** used to store data after characteristic curve transformation *****/
float out_PIN_D25_phyData = 0.0;

/***** GPS VARIABLES *****/
const uint8_t spi_SCLK_PIN_D18 = 18;
const uint8_t spi_MISO_PIN_D19 = 19;
const uint8_t spi_MOSI_PIN_D23 = 23;
const uint8_t spi_CS_PIN_D5 = 5;
const uint8_t spi_RST_PIN_D17 = 17;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
EasyButton pushButton(butt_PushButton_PIN_D4); // Instance of the EasyButton class
DS18B20 ds(temp_DS18B20_DQ_PIN_D13); // Instance of the DS18B20 class

void setup(void)
{
  // put your setup code here, to run once:
  pinMode(butt_PushButton_PIN_D4, INPUT_PULLUP);
  pinMode(ditpullup_PIN_D14, INPUT_PULLUP);
  pinMode(ditpulldown_PIN_D16, INPUT_PULLDOWN);
  pinMode(temp_DS18B20_DQ_PIN_D13, INPUT);

  pushButton.begin(); // Initialize the pushButton object

  SPI.begin(spi_SCLK_PIN_D18, spi_MISO_PIN_D19, spi_MOSI_PIN_D23, spi_CS_PIN_D5); // Initialize SPI communication
  pinMode(spi_RST_PIN_D17, OUTPUT);
  digitalWrite(spi_RST_PIN_D17, HIGH); // Set RST pin to high
}

void loop(void)
{
  // put your main code here, to run repeatedly:
  updateOutputs(); // Refresh output data
  readGPS(); // Read GPS data
}

void updateOutputs(void)
{
  // Implement the logic for updating the output data
  // based on the system requirements
  // For example, if button is pressed, set out to 128
  if (pushButton.read() == true) {
    out_PIN_D25_rawData = 128;
  } else {
    out_PIN_D25_rawData = 0;
  }

  // Implement the logic to update the DAC output
  // For example, use analogWrite() function to set the output voltage
  analogWrite(out_PIN_D25, out_PIN_D25_rawData);
}

void readGPS(void)
{
  // Code to read GPS data from SPI and generate sinusoidal signal if position is moving
  // Implement the system requirement logic here
}