/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: Time Control
	- Source Code NOT compiled for: Arduino Uno
	- Source Code created on: 2024-04-27 15:55:14

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* turn on for 30 sec then stop and repeat cycle */
/****** SYSTEM REQUIREMENT 2 *****/
	/* In a continuous cycle, Turn on LED for 30 seconds */
	/* then stop for 10 seconds */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include   // https://github.com/arduino-libraries/Servo

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void updateOutputs(void);

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t led_LEDRGB_Red_PIN_D2        = 2;

/***** DEFINITION OF PWM OUTPUT PINS *****/
const uint8_t Servo_Servomotor_PWMSignal_PIN_D3    = 3;

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
bool    led_LEDRGB_Red_PIN_D2_rawData        = 0;
uint8_t Servo_Servomotor_PWMSignal_PIN_D3_rawData    = 0;

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
float   led_LEDRGB_Red_PIN_D2_phyData        = 0.0;
float   Servo_Servomotor_PWMSignal_PIN_D3_phyData    = 0.0;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
Servo myservo; // Create a Servo object

void setup(void)
{
    // put your setup code here, to run once:

    pinMode(led_LEDRGB_Red_PIN_D2,   OUTPUT);
    pinMode(Servo_Servomotor_PWMSignal_PIN_D3, OUTPUT);

    myservo.attach(Servo_Servomotor_PWMSignal_PIN_D3); // Attach the Servo object to the PWM pin
}

void loop(void)
{
    // put your main code here, to run repeatedly:

    unsigned long currentMillis = millis();

    if (currentMillis % 40000 < 30000) {
        // Turn on LED for 30 seconds
        led_LEDRGB_Red_PIN_D2_rawData = HIGH;
    } else {
        // Stop LED for 10 seconds
        led_LEDRGB_Red_PIN_D2_rawData = LOW;
    }

    updateOutputs(); // Refresh output data
}

void updateOutputs()
{
    digitalWrite(led_LEDRGB_Red_PIN_D2, led_LEDRGB_Red_PIN_D2_rawData);
    analogWrite(Servo_Servomotor_PWMSignal_PIN_D3, Servo_Servomotor_PWMSignal_PIN_D3_rawData);
}

/* END CODE */