/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: LED Blink
	- Source Code NOT compiled for: ESP32 DevKit V1
	- Source Code created on: 2024-10-22 19:14:18

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* po naciśnieciu mrugaj */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <EasyButton.h>  // https://github.com/evert-arias/EasyButton

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t switch_PushButton_PIN_D4 = 4; // Button pin
const uint8_t led_PIN = 13; // LED pin (usually built-in on many boards)

/****** DEFINITION OF LIBRARIES CLASS INSTANCES *****/
// Instance of the button, initialized with the pin number and default parameters
EasyButton button(switch_PushButton_PIN_D4); // Using the constructor of EasyButton

void setup(void)
{
    // put your setup code here, to run once:
    Serial.begin(115200); // Initialize Serial communication for debugging
    Serial.println(">>> EasyButton example <<<");

    // Initialize the button
    button.begin(); // Set up the button
    button.onPressed([]() { // Lambda function to handle button press
        Serial.println("Button pressed");
        // Blink the LED when the button is pressed
        for (int i = 0; i < 5; i++) { // Blink 5 times
            digitalWrite(led_PIN, HIGH); // Turn on LED
            delay(100); // Keep LED on for 100 milliseconds
            digitalWrite(led_PIN, LOW); // Turn off LED
            delay(100); // Keep LED off for 100 milliseconds
        }
    });

    pinMode(switch_PushButton_PIN_D4, INPUT_PULLUP); // Set the button pin as input with pull-up resistor
    pinMode(led_PIN, OUTPUT); // Set the LED pin as output
}

void loop(void)
{
    // put your main code here, to run repeatedly:
    button.read(); // Continuously read the button state
}

/* END CODE */