//BT JAMMER .INO: https://github.com/Mxtiv/BlueJammer/blob/main/BlueJammer.ino
// NRF24L01+ PA/LNA & ESP32-WROOM

#include "RF24.h"
#include <ezButton.h>
#include "esp_bt.h"
#include "esp_wifi.h"

SPIClass *sp = nullptr;

//HSPI=SCK = 14, MISO = 12, MOSI = 13, CS = 15 , CE = 16
//VSPI=SCK = 18, MISO =19, MOSI = 23 ,CS =21 ,CE = 22


RF24 radio(22, 21, 16000000); ///DEFAULT 10000000

byte i = 45; ///37-50 CHANNEL (CHANNEL NRF NEEDS TO START )

unsigned int flag = 0;


ezButton toggleSwitch(33);


void initSP() {
sp = new SPIClass(VSPI);
sp->begin();
if (radio.begin(sp)) {
delay(1000);
Serial.println("Sp Started !!!");
radio.setAutoAck(false);
radio.stopListening();
radio.setRetries(0, 0);
radio.setPayloadSize(5); ////SET VALUE ON RF24.CPP
radio.setAddressWidth(3); ////SET VALUE ON RF24.CPP
radio.setPALevel(RF24_PA_MAX, true);
radio.setDataRate(RF24_2MBPS);
radio.setCRCLength(RF24_CRC_DISABLED);
radio.printPrettyDetails();
radio.startConstCarrier(RF24_PA_MAX, i); ////EDITED VALUES ON LIBRARY ....SET 5 BYTES PAYLOAD SIZE//REDUCE RF24_MAX TO RF24_HIGH OR LOW IF RF NOT STABLE



} else {
Serial.println("SP couldn't start !!!");
}
}
void two() {

///CHANNEL WITH 2 SPACING HOPPING
if (flag == 0) {
i += 2;
} else {
i -= 2;
}

if ((i > 79) && (flag == 0)) {
flag = 1;
} else if ((i < 2) && (flag == 1)) {
flag = 0;
}

radio.setChannel(i);
// Serial.println(i);
}

void one() {
for (int i = 0; i < 15; i++) {
radio.setChannel(i);
}
}

// radio.setChannel(random(79));




void setup(void) {
pinMode(33, INPUT_PULLUP); // BUILD-IN RESISTOR
esp_bt_controller_deinit();
esp_wifi_stop();
esp_wifi_deinit();
Serial.begin(115200);
delay(1000);
Serial.println("Setup started...");
toggleSwitch.setDebounceTime(50);
initSP();
}


void loop(void) {

toggleSwitch.loop(); // MUST call the loop() function first

if (toggleSwitch.isPressed())
Serial.println("one");
if (toggleSwitch.isReleased())
Serial.println("two");

int state = toggleSwitch.getState();


if (state == HIGH)
two();

else {
one();
}
}