/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: Button LED
	- Source Code compiled for: Arduino Uno
	- Source Code created on: 2023-12-18 10:09:29

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* Turn on when button on turn off when bottom off */
/****** SYSTEM REQUIREMENT 2 *****/
	/* Turn on when button on turn off when bottom off */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <Arduino.h>

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t Prajwal_LED_PIN_D2 = 2; // Define the digital output pin for the LED
const uint8_t buttonPin = 3; // Define the digital input pin for the button

void setup(void)
{
	// put your setup code here, to run once:
	pinMode(Prajwal_LED_PIN_D2, OUTPUT); // Set the LED pin as output
	pinMode(buttonPin, INPUT_PULLUP); // Set the button pin as input with internal pull-up resistor
}

void loop(void)
{
	// put your main code here, to run repeatedly:
	// Implement the system requirements

	/****** SYSTEM REQUIREMENT 1 *****/
	/* Turn on when button is pressed, turn off when button is released */
	if (digitalRead(buttonPin) == LOW) {
		digitalWrite(Prajwal_LED_PIN_D2, HIGH); // Turn on the LED
	} else {
		digitalWrite(Prajwal_LED_PIN_D2, LOW); // Turn off the LED
	}

	/****** SYSTEM REQUIREMENT 2 *****/
	/* Turn on when button is pressed, turn off when button is released */
	if (digitalRead(buttonPin) == LOW) {
		// Implement the code for system requirement 2 here
	}

}