=== START OF INFORMATION SECTION ===
Vendor:               TOSHIBA
Product:              MG10SCP20TA
Revision:             PE0A
Compliance:           SPC-4
User Capacity:        20,000,588,955,648 bytes [20.0 TB]
Logical block size:   4096 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000039d7833b7b1
Serial number:        84P0A09EF98J
Device type:          disk
Transport protocol:   SAS (SPL-4)
Local Time is:        Thu Feb 26 19:43:40 2026 PST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     24 C
Drive Trip Temperature:        65 C

Manufactured in week 34 of year 2024
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  15
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  16
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0        0         0         0          0      36166.133           0
write:         0        1         0         0          0         78.047           0

Non-medium error count:        0

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -     157                 - [-   -    -]

Long (extended) Self-test duration: 103080 seconds [28.6 hours]

Background scan results log
  Status: scan is active
    Accumulated power on time, hours:minutes 201:13 [12073 minutes]
    Number of background scans performed: 3,  scan progress: 72.04%
    Number of background medium scans performed: 3
Device does not support General statistics and performance logging

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 1
  number of phys = 1
  phy identifier = 0
    attached device type: SAS or SATA device
    attached reason: power on
    reason: power on
    negotiated logical link rate: phy enabled; 12 Gbps
    attached initiator port: ssp=1 stp=1 smp=1
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000039d7833b7b2
    attached SAS address = 0x500605b0100b51f6
    attached phy identifier = 4
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization count = 0
    Phy reset problem count = 0
    Phy event descriptors:
     Elasticity buffer overflow count: 0
     Received abandon-class OPEN_REJECT count: 0
     Transmitted BREAK count: 0
     Received BREAK count: 0
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 1
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000039d7833b7b3
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization count = 0
    Phy reset problem count = 0
    Phy event descriptors:
     Elasticity buffer overflow count: 0
     Received abandon-class OPEN_REJECT count: 0
     Transmitted BREAK count: 0
     Received BREAK count: 0
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0