/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: Scanner
	- Source Code compiled for: Arduino Pro Mini 3.3V
	- Source Code created on: 2023-11-07 14:59:33
	- Source Code generated by: AlexWind

********* Pleasedontcode.com **********/
/****** DEFINITION OF LIBRARIES *****/
#include <Arduino.h>
#include <EasyButton.h>
#include <DS18B20.h>

/****** SYSTEM REQUIREMENT 1 *****/
/* every time the button is pressed 3 times, so read */
/* sensor and provide information on serial monitor. */

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t pulsante_PushButton_PIN_D3 = 3;
const uint8_t sensor_DS18B20_DQ_PIN_D5 = 5;

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t led_LED_PIN_D2 = 2;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
EasyButton button(pulsante_PushButton_PIN_D3);
DS18B20 sensor(sensor_DS18B20_DQ_PIN_D5);

// Counter for button presses
uint8_t buttonPressCount = 0;

void setup(void)
{
  // put your setup code here, to run once:
  pinMode(pulsante_PushButton_PIN_D3, INPUT_PULLUP);
  pinMode(sensor_DS18B20_DQ_PIN_D5, INPUT);
  pinMode(led_LED_PIN_D2, OUTPUT);

  // Initialize the button
  button.begin();

  // Start serial communication
  Serial.begin(9600);
}

void loop(void)
{
  // put your main code here, to run repeatedly:
  button.read();

  // Check if the button was pressed
  if (button.wasPressed())
  {
    // Increment the button press count
    buttonPressCount++;

    // Check if the button was pressed 3 times
    if (buttonPressCount == 3)
    {
      // Read the temperature from the sensor
      float temperature = sensor.getTempC();

      // Print the temperature on the serial monitor
      Serial.print("Temperature: ");
      Serial.print(temperature);
      Serial.println(" °C");

      // Reset the button press count
      buttonPressCount = 0;
    }
  }
}