/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: **Keypad Control**
	- Source Code NOT compiled for: Arduino Nano ESP32
	- Source Code created on: 2024-10-06 00:38:45

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* The servo motor installed in the door will lock or */
	/* unlock based on the correct PIN code received by */
	/* the button. If the door is unlocked and the PIN is */
	/* correct, it will lock. If the door is locked and */
	/* the PIN is correct, it will unlock. */
/****** SYSTEM REQUIREMENT 2 *****/
	/* The webserver provides a web page about lock or */
	/* unlock state of the door. */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <Deneyap_Servo.h>	//https://github.com/deneyapkart/deneyap-servo-arduino-library
#include <Keypad.h>	//https://github.com/Chris--A/Keypad
#include <EasyButton.h>	//https://github.com/evert-arias/EasyButton
#include <LcdKeypad.h>	//https://github.com/dniklaus/arduino-display-lcdkeypad

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void updateOutputs();
bool checkPin(); // Function to validate PIN

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t keypad_Keypad3x4_R1_PIN_D4		= 4;
const uint8_t keypad_Keypad3x4_R2_PIN_D5		= 5;
const uint8_t keypad_Keypad3x4_R3_PIN_D6		= 6;
const uint8_t keypad_Keypad3x4_R4_PIN_D7		= 7;
const uint8_t pinButton_PushButton_PIN_D2		= 2;

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t keypad_Keypad3x4_C1_PIN_D8		= 8;
const uint8_t keypad_Keypad3x4_C2_PIN_D9		= 9;
const uint8_t keypad_Keypad3x4_C3_PIN_D10		= 10;

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
bool	keypad_Keypad3x4_C1_PIN_D8_rawData		= 0;
bool	keypad_Keypad3x4_C2_PIN_D9_rawData		= 0;
bool	keypad_Keypad3x4_C3_PIN_D10_rawData		= 0;

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
float	keypad_Keypad3x4_C1_PIN_D8_phyData		= 0.0;
float	keypad_Keypad3x4_C2_PIN_D9_phyData		= 0.0;
float	keypad_Keypad3x4_C3_PIN_D10_phyData		= 0.0;

const uint8_t KEYPAD3X4_ROWS = 4; //four rows
const uint8_t KEYPAD3X4_COLS = 3; //three columns
char Keys_Keypad3x4[KEYPAD3X4_ROWS][KEYPAD3X4_COLS] = {
	{'1','2','3'},
	{'4','5','6'},
	{'7','8','9'},
	{'*','0','#'},
};

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
Deneyap_Servo servo; // Servo instance
MyLcdKeypadAdapter* myLcdKeypadAdapter; // LCD Keypad Adapter instance

void setup(void)
{
	// put your setup code here, to run once:
	pinMode(keypad_Keypad3x4_R1_PIN_D4,	INPUT_PULLUP);
	pinMode(keypad_Keypad3x4_R2_PIN_D5,	INPUT_PULLUP);
	pinMode(keypad_Keypad3x4_R3_PIN_D6,	INPUT_PULLUP);
	pinMode(keypad_Keypad3x4_R4_PIN_D7,	INPUT_PULLUP);
	pinMode(pinButton_PushButton_PIN_D2,	INPUT_PULLUP);

	pinMode(keypad_Keypad3x4_C1_PIN_D8,	 OUTPUT);
	pinMode(keypad_Keypad3x4_C2_PIN_D9,	 OUTPUT);
	pinMode(keypad_Keypad3x4_C3_PIN_D10,	 OUTPUT);

	// Initialize the servo
	setupServo(3); // Assuming the servo is connected to pin 3
}

void loop(void)
{
	// put your main code here, to run repeatedly:
	updateOutputs(); // Refresh output data
	// Call the function to handle keypad input
	myLcdKeypadAdapter->handleButtons(); // Handle button presses
}

void updateOutputs()
{
	digitalWrite(keypad_Keypad3x4_C1_PIN_D8, keypad_Keypad3x4_C1_PIN_D8_rawData);
	digitalWrite(keypad_Keypad3x4_C2_PIN_D9, keypad_Keypad3x4_C2_PIN_D9_rawData);
	digitalWrite(keypad_Keypad3x4_C3_PIN_D10, keypad_Keypad3x4_C3_PIN_D10_rawData);
}

bool checkPin() {
	// Implement your PIN checking logic here
	return true; // Placeholder for successful PIN check
}

/* END CODE */