/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: "Microcontroller Control"
	- Source Code NOT compiled for: Arduino Nano ESP32
	- Source Code created on: 2024-07-31 14:21:43

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* SolarHAT utilise Bluetooth pour transmettre les */
	/* données du capteur DS18B20 à l'application mobile, */
	/* qui ajuste l'éclairage OLED. Le module SIM800L */
	/* envoie les données GPS au cloud, puis à */
	/* l'application mobile. */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include  //https://github.com/plerup/espsoftwareserial
#include 	//https://github.com/vittorioexp/Sim800L-Arduino-Library-revised
#include 	//https://github.com/FastLED/FastLED

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t sim800_SIM800L_RING_PIN_D6		= 6;

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t sim800_SIM800L_RST_PIN_D5		= 5;
const uint8_t sim800_SIM800L_DTR_PIN_D10		= 10;
const uint8_t bandeled_P9813_CIN_PIN_D4		= 4;

/***** DEFINITION OF Software Serial *****/
const uint8_t sim800_SIM800L_Serial_PIN_SERIAL_TX_A0		= A0;
const uint8_t sim800_SIM800L_Serial_PIN_SERIAL_RX_A1		= A1;

// Initialize the Software Serial object for SIM800L communication
EspSoftwareSerial::UART sim800_SIM800L_Serial;

// Initialize the SIM800L object with RX, TX, and RST pins
Sim800L GSM(sim800_SIM800L_Serial_PIN_SERIAL_RX_A1, sim800_SIM800L_Serial_PIN_SERIAL_TX_A0, sim800_SIM800L_RST_PIN_D5);

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
/***** used to store raw data *****/
bool	sim800_SIM800L_RST_PIN_D5_rawData		= 0;
bool	sim800_SIM800L_DTR_PIN_D10_rawData		= 0;
bool	bandeled_P9813_CIN_PIN_D4_rawData		= 0;

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
/***** used to store data after characteristic curve transformation *****/
float	sim800_SIM800L_RST_PIN_D5_phyData		= 0.0;
float	sim800_SIM800L_DTR_PIN_D10_phyData		= 0.0;
float	bandeled_P9813_CIN_PIN_D4_phyData		= 0.0;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES *****/
#define LED_PIN     4
#define COLOR_ORDER GRB
#define CHIPSET     WS2811
#define NUM_LEDS    30
#define BRIGHTNESS  200

CRGB leds[NUM_LEDS]; // Define an array of LEDs

void setup(void)
{
	// put your setup code here, to run once:
	pinMode(sim800_SIM800L_RING_PIN_D6,	INPUT_PULLUP);
	pinMode(sim800_SIM800L_RST_PIN_D5,	 OUTPUT);
	pinMode(sim800_SIM800L_DTR_PIN_D10,	 OUTPUT);
	pinMode(bandeled_P9813_CIN_PIN_D4,	 OUTPUT);

	// Start the Software Serial communication
	sim800_SIM800L_Serial.begin(9600, SWSERIAL_8N1, sim800_SIM800L_Serial_PIN_SERIAL_RX_A1, sim800_SIM800L_Serial_PIN_SERIAL_TX_A0, false);

	// Initialize the SIM800L module
	GSM.begin(4800); // Set the baud rate for SIM800L

	// Initialize FastLED
	FastLED.addLeds(leds, NUM_LEDS).setCorrection(TypicalLEDStrip);
	FastLED.setBrightness(BRIGHTNESS);
}

void loop(void)
{
	// put your main code here, to run repeatedly:
	updateOutputs(); // Refresh output data

	// Here you would typically handle Bluetooth communication and GPS data sending
	handleBluetooth(); // Call function to handle Bluetooth data transmission
	sendGpsDataToCloud(); // Call function to send GPS data to the cloud
}

void updateOutputs()
{
	digitalWrite(sim800_SIM800L_RST_PIN_D5, sim800_SIM800L_RST_PIN_D5_rawData);
	digitalWrite(sim800_SIM800L_DTR_PIN_D10, sim800_SIM800L_DTR_PIN_D10_rawData);
	digitalWrite(bandeled_P9813_CIN_PIN_D4, bandeled_P9813_CIN_PIN_D4_rawData);
}

// Function to handle Bluetooth communication
void handleBluetooth() {
	// Code for Bluetooth communication to send DS18B20 sensor data to the mobile application
	// This function should include the logic to read the sensor data and transmit it via Bluetooth
}

// Function to send GPS data to the cloud
void sendGpsDataToCloud() {
	// Code to gather GPS data and send it to the cloud via the SIM800L module
	// This function should include the logic to read GPS data and make HTTP requests to the cloud server
}

/* END CODE */