/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: "OLED Setup"
	- Source Code compiled for: ESP32 DevKit V1
	- Source Code created on: 2024-02-17 06:44:15

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* wyswietl na wyswietlaczy encje pobrane z home */
	/* assistant */
/****** SYSTEM REQUIREMENT 2 *****/
	/* Wyswietl encje pobrane z home assistant.  ip Home */
	/* assistant to 192.168.1.200  ssid: Coolmatic_Home */
	/* password: Slodziak770811m */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <Wire.h>
#include <Adafruit_SSD1306.h>
#include <U8g2_for_Adafruit_GFX.h>

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/****** DEFINITION OF I2C PINS AND SLAVE ADDRESS *****/
const uint8_t SSD1306_I2C_SDA_PIN = 21;
const uint8_t SSD1306_I2C_SCL_PIN = 22;
const uint8_t SSD1306_I2C_SLAVE_ADDRESS = 60;

/****** DEFINITION OF LIBRARY CLASS INSTANCES *****/
Adafruit_SSD1306 display(SSD1306_I2C_SDA_PIN, SSD1306_I2C_SCL_PIN, SSD1306_I2C_SLAVE_ADDRESS);
U8G2_FOR_ADAFRUIT_GFX u8g2_for_adafruit_gfx;

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
// Display entities received from Home Assistant
void displayEntitiesFromHomeAssistant() {
  // Code to fetch and display entities from Home Assistant
}

/****** SYSTEM REQUIREMENT 2 *****/
// Display entities fetched from Home Assistant with IP: 192.168.1.200, SSID: Coolmatic_Home, Password: Slodziak770811m
void displayEntitiesFromHomeAssistantWithIP() {
  // Code to fetch and display entities from Home Assistant with the specified IP
}

void setup(void)
{
  // Initialize display with I2C pins and slave address
  display.begin(SSD1306_SWITCHCAPVCC, SSD1306_I2C_SLAVE_ADDRESS);
  
  // Initialize U8g2_for_Adafruit_GFX
  u8g2_for_adafruit_gfx.begin(display);

  // Other setup code here
}

void loop(void)
{
  // Main code here

  // Display update code
  display.display();
}