/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: Fuel Monitor
	- Source Code NOT compiled for: Arduino Uno
	- Source Code created on: 2024-08-17 22:01:06

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* The application shall read fuel levels via a */
	/* potentiometer, displaying results on an I2C */
	/* LiquidCrystal display, and trigger an LED and */
	/* buzzer when fuel is critically low, enhancing user */
	/* interaction and safety. */
/****** SYSTEM REQUIREMENT 2 *****/
	/* a menu for lcd to adjust buzzer and led settings */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include 
#include 	//https://github.com/evert-arias/EasyButton
#include 	//https://github.com/marcoschwartz/LiquidCrystal_I2C

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void updateOutputs(void);
void displayFuelLevel(float fuelLevel);
void checkFuelLevel(float fuelLevel);
void menu(); // Function to handle the menu for adjusting settings

/***** DEFINITION OF ANALOG INPUT PINS *****/
const uint8_t fuelLevel_Potentiometer_Vout_PIN_A0		= A0;

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t led_LED_PIN_D3		= 3;
const uint8_t buzzer_ActiveBuzzer_output_PIN_D4		= 4;

/***** DEFINITION OF I2C PINS *****/
const uint8_t lcd_LCD1602I2C_I2C_SLAVE_ADDRESS		= 0x27; // Updated I2C address to common value for LCD

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
bool	led_LED_PIN_D3_rawData		= 0;
bool	buzzer_ActiveBuzzer_output_PIN_D4_rawData		= 0;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
// Create an instance of the EasyButton class for button handling
#define BUTTON_PIN 2 // Define the button pin
EasyButton button(BUTTON_PIN); // Initialize EasyButton with the button pin

// Create an instance of the LiquidCrystal_I2C class for LCD handling
LiquidCrystal_I2C lcd(lcd_LCD1602I2C_I2C_SLAVE_ADDRESS, 20, 4); // Initialize LCD with I2C address and dimensions

void setup(void)
{
	// put your setup code here, to run once:

	pinMode(fuelLevel_Potentiometer_Vout_PIN_A0,	INPUT);
	pinMode(led_LED_PIN_D3,	 OUTPUT);
	pinMode(buzzer_ActiveBuzzer_output_PIN_D4,	 OUTPUT);

	// Initialize the LCD
	lcd.init();                      
	lcd.backlight(); // Turn on the backlight for the LCD

	// Initialize the button
	button.begin(); // Call begin to initialize the button
}

void loop(void)
{
	// put your main code here, to run repeatedly:

	updateOutputs(); // Refresh output data

	// Continuously read the status of the button
	button.read(); // Read the button state

	// Read fuel level from the potentiometer
	float fuelLevel = analogRead(fuelLevel_Potentiometer_Vout_PIN_A0) * (100.0 / 1023.0); // Convert to percentage

	// Display the fuel level on the LCD
	displayFuelLevel(fuelLevel);

	// Check the fuel level and update LED and buzzer
	checkFuelLevel(fuelLevel);

	// Check if the button is pressed to open the menu
	if (button.read()) {
		menu(); // Open the menu for adjusting settings
	}
}

void updateOutputs()
{
	digitalWrite(led_LED_PIN_D3, led_LED_PIN_D3_rawData);
	digitalWrite(buzzer_ActiveBuzzer_output_PIN_D4, buzzer_ActiveBuzzer_output_PIN_D4_rawData);
}

void displayFuelLevel(float fuelLevel) {
	lcd.setCursor(0, 0);
	lcd.print("Fuel Level: ");
	lcd.print(fuelLevel);
	lcd.print(" %");
}

void checkFuelLevel(float fuelLevel) {
	if (fuelLevel < 15.0) { // Critical level threshold
		led_LED_PIN_D3_rawData = HIGH; // Turn on LED
		buzzer_ActiveBuzzer_output_PIN_D4_rawData = HIGH; // Turn on Buzzer
	} else {
		led_LED_PIN_D3_rawData = LOW; // Turn off LED
		buzzer_ActiveBuzzer_output_PIN_D4_rawData = LOW; // Turn off Buzzer
	}
}

void menu() {
	// Simple menu implementation to adjust buzzer and LED settings
	lcd.clear();
	lcd.setCursor(0, 0);
	lcd.print("Menu:");
	lcd.setCursor(0, 1);
	lcd.print("1: Buzzer ON/OFF");
	lcd.setCursor(0, 2);
	lcd.print("2: LED ON/OFF");
	lcd.setCursor(0, 3);
	lcd.print("Press button to select");

	// Wait for button press to select an option
	while (!button.read()) {
		// Do nothing, just wait
	}

	// Implement the logic to toggle buzzer and LED settings
	// This is a placeholder for the actual implementation
	// You can add more detailed logic here based on user input
}

/* END CODE */