/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: GPS Tracker
	- Source Code compiled for: ESP32 DevKit V1
	- Source Code created on: 2024-05-12 08:00:44

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* I want the North South and East West GPS */
	/* coordinates to appear on the display in addition */
	/* to the time, the module is a lilygo TTGO. */
/****** END SYSTEM REQUIREMENTS *****/


/****** DEFINITION OF LIBRARIES *****/
#include 
#include 	//https://github.com/stblassitude/Adafruit_SSD1306_Wemos_OLED.git

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF I2C PINS *****/
const uint8_t GPS_SSD1306OledDisplay_I2C_PIN_SDA_D21 = 21;
const uint8_t GPS_SSD1306OledDisplay_I2C_PIN_SCL_D22 = 22;
const uint8_t GPS_SSD1306OledDisplay_I2C_SLAVE_ADDRESS = 60;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
Adafruit_SSD1306 display(/*DC*/ 4, /*RST*/ -1, /*CS*/ -1); // Assuming reset pin is not connected

void setup(void)
{
	// put your setup code here, to run once:
	display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // Initialize with I2C address 0x3C
	display.display();
	delay(2000);
	display.clearDisplay();
	display.drawPixel(10, 10, WHITE);
	display.display();
	delay(2000);
	// Add your additional setup code here

	// Display GPS coordinates and time on the OLED
	display.clearDisplay();
	display.setTextSize(1);
	display.setTextColor(WHITE);
	display.setCursor(0, 0);
	display.println("GPS Coordinates:");
	display.setTextSize(2);
	display.setCursor(0, 10);
	display.println("N: 00.0000");
	display.setCursor(0, 30);
	display.println("E: 00.0000");
	display.setTextSize(1);
	display.setCursor(0, 50);
	display.println("Time: 12:00 PM");
	display.display();
	delay(5000);
}

void loop(void)
{
	// put your main code here, to run repeatedly:
}

/* END CODE */