/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: "Temperature Display"
	- Source Code NOT compiled for: Arduino Uno
	- Source Code created on: 2025-02-07 14:36:51

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* Implementar un sistema de notificación que */
	/* enciende un LED si el sensor DHT22 detecta */
	/* temperatura sobre 28°C o humedad sobre 65%, */
	/* asegurando una supervisión constante del entorno. */
/****** END SYSTEM REQUIREMENTS *****/

/* START CODE */

/****** DEFINITION OF LIBRARIES *****/
#include 	//https://github.com/RobTillaart/DHTlib
#include 
#include 

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/

// Configura los pines y objetos
#define DHTPIN 2     // Digital pin connected to the DHT sensor
#define DHTTYPE DHT11   // DHT 11
#define LCD_ADDR 0x27  // Dirección I2C del LCD (puede variar)
#define LED_PIN 13     // Pin connected to the LED

DHT dht(DHTPIN, DHTTYPE);
LiquidCrystal_I2C lcd(LCD_ADDR, 16, 2);

void setup(void)
{
	// put your setup code here, to run once:
	Serial.begin(115200);
	
	// Inicializa el sensor DHT y el LCD
	dht.begin();
	lcd.init();
	lcd.backlight();
	
	// Configura el pin del LED como salida
	pinMode(LED_PIN, OUTPUT);
}

void loop(void)
{
	// put your main code here, to run repeatedly:
	// Lee la temperatura y humedad
	float h = dht.readHumidity();
	float t = dht.readTemperature();

	// Muestra la información en el LCD
	lcd.clear();
	lcd.setCursor(0, 0);
	lcd.setCursor(10, 0);
	lcd.print("T:");
	lcd.print(t);
	lcd.print("C ");
	lcd.setCursor(10, 1);
	lcd.print("H:");
	lcd.print(h);
	lcd.print("%");

	// Verifica las condiciones de temperatura y humedad
	if (t > 28.0 || h > 65.0) {
		digitalWrite(LED_PIN, HIGH); // Enciende el LED
	} else {
		digitalWrite(LED_PIN, LOW); // Apaga el LED
	}

	delay(2000);
}

/* END CODE */