/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: Nimo
	- Source Code compiled for: Arduino Uno
	- Source Code created on: 2023-11-13 03:06:31
	- Source Code generated by: personal

********* Pleasedontcode.com **********/
/****** DEFINITION OF LIBRARIES *****/
#include <Arduino.h>
#include <Servo.h>

/****** SYSTEM REQUIREMENT 1 *****/
/* When send a command the servo turn to 10 degree */
/* and when b command send the servo back to their */
/* original position */

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF PWM OUTPUT PINS *****/
const uint8_t V3003_Servomotor_PWMSignal_PIN_D3 = 3;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
Servo myservo; // Instantiate the Servo class object

void setup(void)
{
  // put your setup code here, to run once:
  myservo.attach(V3003_Servomotor_PWMSignal_PIN_D3); // Attach the servo to the PWM pin
}

void loop(void)
{
  // put your main code here, to run repeatedly:
  myservo.write(10); // Turn the servo to 10 degrees
  delay(1000); // Wait for 1 second

  myservo.write(90); // Return the servo to its original position (90 degrees)
  delay(1000); // Wait for 1 second
}