/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: Ai
	- Source Code compiled for: Arduino Nano
	- Source Code created on: 2023-10-20 12:53:41
	- Source Code generated by: Upwork

********* Pleasedontcode.com **********/
/****** DEFINITION OF LIBRARIES *****/
#include <Arduino.h>

/****** SYSTEM REQUIREMENT 1 *****/
/* I want to create a bot which automatically turns on/off */
/* the light when a person is in the room. So the light */
/* should automatically turn on when a person is present */
/* in the room and turn off when there is no person. */

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void turnOnLight(void);
void turnOffLight(void);
bool isPersonPresent(void);

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t boot_LEDRGB_Red_PIN_D2 = 2;    // Pin for red LED
const uint8_t boot_LEDRGB_Green_PIN_D3 = 3;  // Pin for green LED
const uint8_t boot_LEDRGB_Blue_PIN_D4 = 4;   // Pin for blue LED

void setup(void)
{
  // put your setup code here, to run once:
  pinMode(boot_LEDRGB_Red_PIN_D2, OUTPUT);
  pinMode(boot_LEDRGB_Green_PIN_D3, OUTPUT);
  pinMode(boot_LEDRGB_Blue_PIN_D4, OUTPUT);
}

void loop(void)
{
  // put your main code here, to run repeatedly:
  if (isPersonPresent()) {
    turnOnLight();
  } else {
    turnOffLight();
  }
}

void turnOnLight(void)
{
  digitalWrite(boot_LEDRGB_Red_PIN_D2, HIGH);
  digitalWrite(boot_LEDRGB_Green_PIN_D3, HIGH);
  digitalWrite(boot_LEDRGB_Blue_PIN_D4, HIGH);
}

void turnOffLight(void)
{
  digitalWrite(boot_LEDRGB_Red_PIN_D2, LOW);
  digitalWrite(boot_LEDRGB_Green_PIN_D3, LOW);
  digitalWrite(boot_LEDRGB_Blue_PIN_D4, LOW);
}

bool isPersonPresent(void)
{
  // Add your code to check if a person is present in the room
  // Return true if a person is present, false otherwise
  // You can use sensors like PIR motion sensor or ultrasonic sensor to detect presence
  // Example code: return digitalRead(pirSensorPin) == HIGH;
}