/********* Pleasedontcode.com **********
Pleasedontcode thanks you for automatic code generation! Enjoy your code!
- Terms and Conditions:
You have a non-exclusive, revocable, worldwide, royalty-free license
for personal and commercial use. Attribution is optional; modifications
are allowed, but you're responsible for code maintenance. We're not
liable for any loss or damage. For full terms,
please visit pleasedontcode.com/termsandconditions.
- Project: **Web Server**
- Source Code NOT compiled for: ESP32 DevKit V1
- Source Code created on: 2024-11-16 14:40:10
********* Pleasedontcode.com **********/
/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
/* The system shall utilize the Sim800L module for */
/* GSM communication, ensuring reliable data */
/* transmission and reception via SoftwareSerial on */
/* specified pins. It must handle reset and DTR */
/* signals effectively for optimal performance. */
/****** END SYSTEM REQUIREMENTS *****/
/* START CODE */
/****** DEFINITION OF LIBRARIES *****/
#include //https://github.com/plerup/espsoftwareserial
#include //https://github.com/vittorioexp/Sim800L-Arduino-Library-revised
#include //https://github.com/soylentOrange/Forced-BMX280
#include // Include WiFi library for ESP32
#include // Include WebServer library for handling HTTP requests
/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void handleRoot(); // Function to handle root URL
void handleLogin(); // Function to handle login
void handleSignup(); // Function to handle signup
void handleProfile(); // Function to handle profile page
/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t Ny_SIM800L_RING_PIN_RX2 = RX2;
/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t Ny_SIM800L_RST_PIN_D14 = 14;
const uint8_t Ny_SIM800L_DTR_PIN_TX2 = TX2;
/***** DEFINITION OF Software Serial *****/
const uint8_t Ny_SIM800L_Serial_PIN_SERIAL_TX_D4 = 4;
const uint8_t Ny_SIM800L_Serial_PIN_SERIAL_RX_D13 = 13;
SoftwareSerial Ny_SIM800L_Serial(Ny_SIM800L_Serial_PIN_SERIAL_RX_D13, Ny_SIM800L_Serial_PIN_SERIAL_TX_D4);
/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
bool Ny_SIM800L_RST_PIN_D14_rawData = 0;
bool Ny_SIM800L_DTR_PIN_TX2_rawData = 0;
/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
float Ny_SIM800L_RST_PIN_D14_phyData = 0.0;
float Ny_SIM800L_DTR_PIN_TX2_phyData = 0.0;
/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
// Initialize the web server on port 80
WebServer server(80);
Sim800L sim800l(Ny_SIM800L_Serial_PIN_SERIAL_RX_D13, Ny_SIM800L_Serial_PIN_SERIAL_TX_D4, Ny_SIM800L_RST_PIN_D14); // Instantiate Sim800L object
void setup(void)
{
// put your setup code here, to run once:
pinMode(Ny_SIM800L_RING_PIN_RX2, INPUT_PULLUP);
pinMode(Ny_SIM800L_RST_PIN_D14, OUTPUT);
pinMode(Ny_SIM800L_DTR_PIN_TX2, OUTPUT);
// Initialize Software Serial for SIM800L
Ny_SIM800L_Serial.begin(9600);
// Initialize SIM800L
sim800l.begin(9600); // Set baud rate for SIM800L
// Start WiFi connection
WiFi.begin("YOUR_SSID", "YOUR_PASSWORD"); // Replace with your WiFi credentials
while (WiFi.status() != WL_CONNECTED) {
delay(1000);
}
// Define routes
server.on("/", handleRoot);
server.on("/login", handleLogin);
server.on("/signup", handleSignup);
server.on("/profile", handleProfile);
// Start server
server.begin();
}
void loop(void)
{
// put your main code here, to run repeatedly:
updateOutputs(); // Refresh output data
server.handleClient(); // Handle incoming client requests
}
void updateOutputs()
{
digitalWrite(Ny_SIM800L_RST_PIN_D14, Ny_SIM800L_RST_PIN_D14_rawData);
digitalWrite(Ny_SIM800L_DTR_PIN_TX2, Ny_SIM800L_DTR_PIN_TX2_rawData);
}
void handleRoot() {
// Serve the login page
server.send(200, "text/html", R"rawliteral(
WeEarnZA - Get Started
)rawliteral");
}
void handleLogin() {
// Here you would implement the login logic
// For now, just redirect to the profile page
server.sendHeader("Location", "/profile");
server.send(303); // 303 See Other
}
void handleSignup() {
// Serve the signup page (similar to login)
server.send(200, "text/html", R"rawliteral(
Sign Up
