//DigiJoystick test and usage documentation

#include "DigiJoystick.h"

void setup() {
  pinMode(0, OUTPUT);
  pinMode(1, OUTPUT);
}


void loop() {
  // If not using plentiful DigiJoystick.delay() calls, make sure to
  //DigiJoystick.update(); // call this at least every 50ms
  // calling more often than that is fine
  // this will actually only send the data every once in a while unless the data is different
  
  // you can set the values from a raw byte array with:
  // char myBuf[8] = {
  //   x, y, xrot, yrot, zrot, slider,
  //   buttonLowByte, buttonHighByte
  // };
  // DigiJoystick.setValues(myBuf);
  
  // Or we can also set values like this:
  DigiJoystick.setX((byte) 1); // scroll X left to right repeatedly
  DigiJoystick.setButtons((byte) 1, (byte) 1);
  digitalWrite(0, 1);
  digitalWrite(1, 1);
  // it's best to use DigiJoystick.delay() because it knows how to talk to
  // the connected computer - otherwise the USB link can crash with the 
  // regular arduino delay() function
  DigiJoystick.delay(500); // wait 50 milliseconds
  DigiJoystick.setX((byte) 0); // scroll X left to right repeatedly
  DigiJoystick.setButtons((byte) 1, (byte) 0);
  digitalWrite(0, 0);
  digitalWrite(1, 0);
}