/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: "LED Control"
	- Source Code compiled for: Arduino Uno
	- Source Code created on: 2024-06-11 16:08:42

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* This code will 5 leds. The one entered in the app */
	/* will light up when the time comes, until the */
	/* person turns off the alarm */
/****** END SYSTEM REQUIREMENTS *****/


/****** DEFINITION OF LIBRARIES *****/
#include 
#include   //https://github.com/evert-arias/EasyButton

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void updateOutputs(void);
void onAlarmButtonPressed(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t alarmButton_PushButton_PIN_D5 = 5;

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t LEDRGB_Red_PIN_D2 = 2;
const uint8_t LEDRGB_Green_PIN_D3 = 3;
const uint8_t LEDRGB_Blue_PIN_D4 = 4;
const uint8_t LED1_PIN_D6 = 6;
const uint8_t LED2_PIN_D7 = 7;
const uint8_t LED3_PIN_D8 = 8;
const uint8_t LED4_PIN_D9 = 9;
const uint8_t LED5_PIN_D10 = 10;

/***** DEFINITION OF Software Serial *****/
const uint8_t HC05_mySerial_PIN_SERIAL_TX_A0 = A0;
const uint8_t HC05_mySerial_PIN_SERIAL_RX_A1 = A1;
SoftwareSerial HC05_mySerial(HC05_mySerial_PIN_SERIAL_RX_A1, HC05_mySerial_PIN_SERIAL_TX_A0);

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
/***** used to store raw data *****/
bool LEDRGB_Red_PIN_D2_rawData = 0;
bool LEDRGB_Green_PIN_D3_rawData = 0;
bool LEDRGB_Blue_PIN_D4_rawData = 0;
bool LED1_PIN_D6_rawData = 0;
bool LED2_PIN_D7_rawData = 0;
bool LED3_PIN_D8_rawData = 0;
bool LED4_PIN_D9_rawData = 0;
bool LED5_PIN_D10_rawData = 0;

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
/***** used to store data after characteristic curve transformation *****/
float LEDRGB_Red_PIN_D2_phyData = 0.0;
float LEDRGB_Green_PIN_D3_phyData = 0.0;
float LEDRGB_Blue_PIN_D4_phyData = 0.0;
float LED1_PIN_D6_phyData = 0.0;
float LED2_PIN_D7_phyData = 0.0;
float LED3_PIN_D8_phyData = 0.0;
float LED4_PIN_D9_phyData = 0.0;
float LED5_PIN_D10_phyData = 0.0;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
EasyButton alarmButton(alarmButton_PushButton_PIN_D5);

void setup(void) {
  // put your setup code here, to run once:
  Serial.begin(115200);
  Serial.println();
  Serial.println(">>> EasyButton example with alarm button <<<");

  pinMode(LEDRGB_Red_PIN_D2, OUTPUT);
  pinMode(LEDRGB_Green_PIN_D3, OUTPUT);
  pinMode(LEDRGB_Blue_PIN_D4, OUTPUT);
  pinMode(LED1_PIN_D6, OUTPUT);
  pinMode(LED2_PIN_D7, OUTPUT);
  pinMode(LED3_PIN_D8, OUTPUT);
  pinMode(LED4_PIN_D9, OUTPUT);
  pinMode(LED5_PIN_D10, OUTPUT);

  HC05_mySerial.begin(9600);

  // Initialize the button
  alarmButton.begin();
  alarmButton.onPressed(onAlarmButtonPressed);
}

void loop(void) {
  // put your main code here, to run repeatedly:
  alarmButton.read();  // Read the button state
  updateOutputs();     // Refresh output data
}

void updateOutputs() {
  digitalWrite(LEDRGB_Red_PIN_D2, LEDRGB_Red_PIN_D2_rawData);
  digitalWrite(LEDRGB_Green_PIN_D3, LEDRGB_Green_PIN_D3_rawData);
  digitalWrite(LEDRGB_Blue_PIN_D4, LEDRGB_Blue_PIN_D4_rawData);
  digitalWrite(LED1_PIN_D6, LED1_PIN_D6_rawData);
  digitalWrite(LED2_PIN_D7, LED2_PIN_D7_rawData);
  digitalWrite(LED3_PIN_D8, LED3_PIN_D8_rawData);
  digitalWrite(LED4_PIN_D9, LED4_PIN_D9_rawData);
  digitalWrite(LED5_PIN_D10, LED5_PIN_D10_rawData);
}

void onAlarmButtonPressed() {
  Serial.println("Alarm button pressed");
  // Add additional actions to be performed when the alarm button is pressed
  // For example, turn off all LEDs
  LEDRGB_Red_PIN_D2_rawData = 0;
  LEDRGB_Green_PIN_D3_rawData = 0;
  LEDRGB_Blue_PIN_D4_rawData = 0;
  LED1_PIN_D6_rawData = 0;
  LED2_PIN_D7_rawData = 0;
  LED3_PIN_D8_rawData = 0;
  LED4_PIN_D9_rawData = 0;
  LED5_PIN_D10_rawData = 0;
  updateOutputs();
}

/* END CODE */