root@mimir:~# dmesg | grep -iE "ata|ahci|scsi" | tail -50
[   67.047759] ata12.02: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[   67.047860] ata12.03: hard resetting link
[   67.519446] ata12.03: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[   67.519566] ata12.04: hard resetting link
[   67.832426] ata12.04: SATA link down (SStatus 0 SControl 330)
[   67.863818] ata12.00: configured for UDMA/133
[   67.898311] ata12.01: configured for UDMA/133
[   67.903486] ata12.02: configured for UDMA/133
[   83.078818] ata12.03: qc timeout after 15000 msecs (cmd 0x2f)
[   83.078871] ata12.03: Read log 0x00 page 0x00 failed, Emask 0x5
[   83.078873] ata12.03: NCQ Send/Recv Log not supported
[   83.078875] ata12.03: Read log 0x00 page 0x00 failed, Emask 0x40
[   83.078877] ata12.03: NCQ Non-Data Log not supported
[   83.078879] ata12.03: Read log 0x00 page 0x00 failed, Emask 0x40
[   83.078881] ata12.03: Read log 0x00 page 0x00 failed, Emask 0x40
[   83.078891] ata12.03: failed to set xfermode (err_mask=0x40)
[   83.078893] ata12.03: failed to recover link after 3 tries, disabling
[   83.078895] ata12.03: disable device
[   83.078897] ata12.15: hard resetting link
[   83.550695] ata12.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   83.863109] ata12.03: failed to read SCR 0 (Emask=0x40)
[   83.863117] ata12.03: failed to write SCR 1 (Emask=0x40)
[   83.863119] ata12.03: failed to clear SError.N (errno=-5)
[   83.863122] ata12.15: hard resetting link
[   84.334709] ata12.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   84.647220] ata12.03: failed to read SCR 0 (Emask=0x40)
[   84.647229] ata12.03: failed to write SCR 1 (Emask=0x40)
[   84.647231] ata12.03: failed to clear SError.N (errno=-5)
[   84.647234] ata12.15: hard resetting link
[   85.118708] ata12.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   85.431390] ata12.03: failed to read SCR 0 (Emask=0x40)
[   85.431398] ata12.03: failed to write SCR 1 (Emask=0x40)
[   85.431401] ata12.03: failed to clear SError.N (errno=-5)
[   85.431403] ata12.15: hard resetting link
[   85.902688] ata12.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   86.215404] ata12.03: failed to read SCR 0 (Emask=0x40)
[   86.215412] ata12.03: failed to write SCR 1 (Emask=0x40)
[   86.215414] ata12.03: failed to clear SError.N (errno=-5)
[   86.215416] ata12: failed to recover PMP after 5 tries, giving up
[   86.215418] ata12.15: Port Multiplier detaching
[   86.215429] ata12.00: Check power mode failed (err_mask=0x40)
[   86.215431] ata12.01: Check power mode failed (err_mask=0x40)
[   86.215433] ata12.02: Check power mode failed (err_mask=0x40)
[   86.215435] ata12.00: disable device
[   86.686689] ata12: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   86.686755] ata12: EH complete
[   88.301336] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[   88.492632] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   89.336378] EXT4-fs (nvme0n1p1): mounted filesystem 512026b7-850a-4c8e-a817-9cde22ec6100 r/w with ordered data mode. Quota mode: none.
[  105.256530] nvme nvme0: using unchecked data buffer
root@mimir:~# lsmod | grep ahci
ahci                   49152  2
libahci                53248  1 ahci