/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: Button Sequence
	- Source Code compiled for: Arduino Uno
	- Source Code created on: 2024-03-02 15:51:19

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* I have regular push buttons on pins 2 to 10 and a */
	/* light on 11 of my arduino uno. Create a code so */
	/* that you can use the buttons as a password, so the */
	/* password is pin 2, 3, 4, and 10. If you press them */
	/* one after the other, the light will come on. */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include  //https://github.com/evert-arias/EasyButton

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t button_PushButton_PIN_D2 = 2;
const uint8_t button_PushButton_PIN_D3 = 3;
const uint8_t button_PushButton_PIN_D4 = 4;
const uint8_t button_PushButton_PIN_D10 = 10;
const uint8_t light_PIN_D11 = 11;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
EasyButton button_D2(button_PushButton_PIN_D2);
EasyButton button_D3(button_PushButton_PIN_D3);
EasyButton button_D4(button_PushButton_PIN_D4);
EasyButton button_D10(button_PushButton_PIN_D10);

bool isPasswordCorrect = false;
bool button_D2_Pressed = false;
bool button_D3_Pressed = false;
bool button_D4_Pressed = false;
bool button_D10_Pressed = false;

void setup(void)
{
	// put your setup code here, to run once:
	pinMode(button_PushButton_PIN_D2, INPUT_PULLUP);
	pinMode(button_PushButton_PIN_D3, INPUT_PULLUP);
	pinMode(button_PushButton_PIN_D4, INPUT_PULLUP);
	pinMode(button_PushButton_PIN_D10, INPUT_PULLUP);
	pinMode(light_PIN_D11, OUTPUT);

	// Initialize the buttons
	button_D2.begin();
	button_D3.begin();
	button_D4.begin();
	button_D10.begin();
}

void loop(void)
{
	// put your main code here, to run repeatedly:

	// Read the state of the buttons
	button_D2.read();
	button_D3.read();
	button_D4.read();
	button_D10.read();

	// Check if button D2 is pressed
	if (button_D2.isPressed())
	{
		button_D2_Pressed = true;
	}

	// Check the sequence of button presses
	if (button_D2_Pressed)
	{
		if (button_D3.isPressed())
		{
			button_D3_Pressed = true;
		}

		if (button_D3_Pressed && button_D4.isPressed())
		{
			button_D4_Pressed = true;
		}

		if (button_D4_Pressed && button_D10.isPressed())
		{
			button_D10_Pressed = true;
		}
	}

	// Check if the password is entered correctly
	if (button_D10_Pressed)
	{
		isPasswordCorrect = true;
	}

	// Turn on the light if the password is correct
	if (isPasswordCorrect)
	{
		digitalWrite(light_PIN_D11, HIGH);
	}
}