/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: project12
	- Source Code compiled for: Arduino Uno
	- Source Code created on: 2023-11-21 14:34:49
	- Source Code generated by: Mohammad Ayman

********* Pleasedontcode.com **********/
/****** DEFINITION OF LIBRARIES *****/
#include <Arduino.h>
#include <EasyButton.h>

/****** SYSTEM REQUIREMENT 1 *****/
/* Turn on the 6 LED Lights when the object is near */
/* 20cm in Ultrasonic sensor and on the 2 Snoozers */
/* also */

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void buttonPressed(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t myButton_Pin = 2;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
EasyButton myButton(myButton_Pin);

/****** DEFINITION OF LED PINS *****/
const uint8_t ledPin1 = 3;
const uint8_t ledPin2 = 4;
const uint8_t ledPin3 = 5;
const uint8_t ledPin4 = 6;
const uint8_t ledPin5 = 7;
const uint8_t ledPin6 = 8;

/****** DEFINITION OF SNOOZER PINS *****/
const uint8_t snoozerPin1 = 9;
const uint8_t snoozerPin2 = 10;

void setup(void)
{
    // Initialize Serial for debugging purposes.
    Serial.begin(115200);

    // Initialize the button.
    myButton.begin();

    // Set the callback function for button pressed event.
    myButton.onPressed(buttonPressed);

    // Set LED pins as output
    pinMode(ledPin1, OUTPUT);
    pinMode(ledPin2, OUTPUT);
    pinMode(ledPin3, OUTPUT);
    pinMode(ledPin4, OUTPUT);
    pinMode(ledPin5, OUTPUT);
    pinMode(ledPin6, OUTPUT);

    // Set snoozer pins as output
    pinMode(snoozerPin1, OUTPUT);
    pinMode(snoozerPin2, OUTPUT);
}

void loop(void)
{
    // Read the button state.
    myButton.read();

    // put your main code here, to run repeatedly:
}

void buttonPressed()
{
    // Turn on the 6 LED Lights when the object is near 20cm in Ultrasonic sensor and the 2 Snoozers also
    digitalWrite(ledPin1, HIGH);
    digitalWrite(ledPin2, HIGH);
    digitalWrite(ledPin3, HIGH);
    digitalWrite(ledPin4, HIGH);
    digitalWrite(ledPin5, HIGH);
    digitalWrite(ledPin6, HIGH);

    digitalWrite(snoozerPin1, HIGH);
    digitalWrite(snoozerPin2, HIGH);
}