/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: Trafficlightcontroller
	- Source Code compiled for: Arduino Uno
	- Source Code created on: 2023-11-21 00:50:22
	- Source Code generated by: electronics

********* Pleasedontcode.com **********/
/****** DEFINITION OF LIBRARIES *****/
#include <Arduino.h>

/****** SYSTEM REQUIREMENT 1 *****/
	/* Turn green led for 10s and red for 5s  Blue for 5s */
/****** SYSTEM REQUIREMENT 2 *****/
	/* Turn green led for 10s and red for 5s  Blue for 5s */

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t Led_LEDRGB_Red_PIN_D2 = 2;   // Define pin D2 for red LED
const uint8_t Led_LEDRGB_Green_PIN_D3 = 3; // Define pin D3 for green LED
const uint8_t Led_LEDRGB_Blue_PIN_D4 = 4;  // Define pin D4 for blue LED

void setup(void)
{
	// Set the LED pins as outputs
	pinMode(Led_LEDRGB_Red_PIN_D2, OUTPUT);
	pinMode(Led_LEDRGB_Green_PIN_D3, OUTPUT);
	pinMode(Led_LEDRGB_Blue_PIN_D4, OUTPUT);
}

void loop(void)
{
	// System Requirement 1: Turn green LED on for 10 seconds, then red LED for 5 seconds, and blue LED for 5 seconds
	digitalWrite(Led_LEDRGB_Green_PIN_D3, HIGH); // Turn on green LED
	delay(10000);                               // Wait for 10 seconds
	digitalWrite(Led_LEDRGB_Green_PIN_D3, LOW);  // Turn off green LED

	digitalWrite(Led_LEDRGB_Red_PIN_D2, HIGH);   // Turn on red LED
	delay(5000);                                // Wait for 5 seconds
	digitalWrite(Led_LEDRGB_Red_PIN_D2, LOW);    // Turn off red LED

	digitalWrite(Led_LEDRGB_Blue_PIN_D4, HIGH);  // Turn on blue LED
	delay(5000);                                // Wait for 5 seconds
	digitalWrite(Led_LEDRGB_Blue_PIN_D4, LOW);   // Turn off blue LED

	// System Requirement 2: Turn green LED on for 10 seconds, then red LED for 5 seconds, and blue LED for 5 seconds
	digitalWrite(Led_LEDRGB_Green_PIN_D3, HIGH); // Turn on green LED
	delay(10000);                               // Wait for 10 seconds
	digitalWrite(Led_LEDRGB_Green_PIN_D3, LOW);  // Turn off green LED

	digitalWrite(Led_LEDRGB_Red_PIN_D2, HIGH);   // Turn on red LED
	delay(5000);                                // Wait for 5 seconds
	digitalWrite(Led_LEDRGB_Red_PIN_D2, LOW);    // Turn off red LED

	digitalWrite(Led_LEDRGB_Blue_PIN_D4, HIGH);  // Turn on blue LED
	delay(5000);                                // Wait for 5 seconds
	digitalWrite(Led_LEDRGB_Blue_PIN_D4, LOW);   // Turn off blue LED
}