#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <ESP8266WebServer.h>
#include <ESP8266mDNS.h>
#include <ESP8266HTTPClient.h>


const char* ssid = "<SSID>";
const char* password = "<PASSWORD>";

ESP8266WebServer server(80);

int p = 0;
int dataPin = 13;

#include <RCSwitch.h>

RCSwitch mySwitch = RCSwitch();

// constants won't change. They're used here to
// set pin numbers:
const int buttonPin = 0;     // the number of the pushbutton pin
const int ledPin =  2;      // the number of the LED pin

// variables will change:
int buttonState = 0;         // variable for reading the pushbutton status

void handleRoot() {
  if (server.args() > 0 ) {
    for ( uint8_t i = 0; i < server.args(); i++ ) {
      if (server.argName(i) == "switch") {
        server.send(200, "text/plain", server.arg(i));
        int code = server.arg(i).toInt();
        /* Same switch as above, but using decimal code */
        mySwitch.send(code, 24);
        delay(1000); 
        
      }
    }
  }else{
    server.send(200, "text/plain", "hello from esp8266!");
  }
}

void handleNotFound(){
  String message = "File Not Found\n\n";
  message += "URI: ";
  message += server.uri();
  message += "\nMethod: ";
  message += (server.method() == HTTP_GET)?"GET":"POST";
  message += "\nArguments: ";
  message += server.args();
  message += "\n";
  for (uint8_t i=0; i<server.args(); i++){
    message += " " + server.argName(i) + ": " + server.arg(i) + "\n";
  }
  server.send(404, "text/plain", message);
}

void ring(){
  Serial.println("Ringing Bell");
  HTTPClient http;
  http.begin("http://<server IP>/cgi-bin/doorbell.cgi");
  int httpCode = http.GET();
  http.end();
  delay(5000);
}
void setup() {
  
  // initialize the LED pin as an output:
  pinMode(ledPin, OUTPUT);
  // initialize the pushbutton pin as an input:
  pinMode(buttonPin, INPUT);

  Serial.begin(9600);
  WiFi.begin(ssid, password);
  Serial.println("");

  // Wait for connection
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.print("Connected to ");
  Serial.println(ssid);
  Serial.print("IP address: ");
  Serial.println(WiFi.localIP());

  if (MDNS.begin("esp8266")) {
    Serial.println("MDNS responder started");
  }

  server.on("/", handleRoot);

  server.onNotFound(handleNotFound);

  server.begin();
  Serial.println("HTTP server started");
  // Transmitter is connected to Arduino Pin 'dataPin'  
  mySwitch.enableTransmit(dataPin);

  // Optional set pulse length.
   mySwitch.setPulseLength(185);
}

void loop() {
  // read the state of the pushbutton value:
  buttonState = digitalRead(buttonPin);

  // check if the pushbutton is pressed.
  // if it is, the buttonState is HIGH:
  if (buttonState == HIGH) {
    // turn LED on:
    p=0;
    digitalWrite(ledPin, HIGH);
  } else {
    // turn LED off:
    digitalWrite(ledPin, LOW);
    p++;
    Serial.println(p);
    if(p > 50){
      Serial.println("Ring!!!");
      p=0;
      ring();
    }
      
  }

  //webserver
  server.handleClient();
}