/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: "LEDs Buzzer"
	- Source Code NOT compiled for: Arduino Mega
	- Source Code created on: 2024-06-11 14:02:30

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* Implement a supercar effect using WS2812B LED */
	/* strip controlled by FastLED library. The setup */
	/* involves initializing digital pin 2 for output and */
	/* continuously updating the LED state based on raw */
	/* data input. */
/****** SYSTEM REQUIREMENT 2 *****/
	/* emit sound like supercar telefilm. */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include   // https://github.com/FastLED/FastLED

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void updateOutputs(void);
void fadeall(void);
void playSupercarSound(void);

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t strip_WS2812B_DIN_PIN_D2 = 2;
const uint8_t myActiveBuzzer_ActiveBuzzer_output_PIN_D3 = 3;

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
/***** used to store raw data *****/
bool strip_WS2812B_DIN_PIN_D2_rawData = 0;
bool myActiveBuzzer_ActiveBuzzer_output_PIN_D3_rawData = 0;

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
/***** used to store data after characteristic curve transformation *****/
float strip_WS2812B_DIN_PIN_D2_phyData = 0.0;
float myActiveBuzzer_ActiveBuzzer_output_PIN_D3_phyData = 0.0;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
#define NUM_LEDS 64  // Number of LEDs in the strip
#define DATA_PIN 2   // Data pin for the LED strip

CRGB leds[NUM_LEDS];  // Array to hold the color values for each LED

void setup(void)
{
    // Initialize the LED strip
    FastLED.addLeds(leds, NUM_LEDS);
    FastLED.setBrightness(84);  // Set the brightness of the LEDs

    // Set pin modes for other outputs
    pinMode(strip_WS2812B_DIN_PIN_D2, OUTPUT);
    pinMode(myActiveBuzzer_ActiveBuzzer_output_PIN_D3, OUTPUT);
}

void loop(void)
{
    // Update the LED strip with the Cylon effect
    static uint8_t hue = 0;
    for (int i = 0; i < NUM_LEDS; i++) {
        leds[i] = CHSV(hue++, 255, 255);
        FastLED.show();
        fadeall();
        delay(10);
    }
    for (int i = NUM_LEDS - 1; i >= 0; i--) {
        leds[i] = CHSV(hue++, 255, 255);
        FastLED.show();
        fadeall();
        delay(10);
    }

    // Refresh output data for other outputs
    updateOutputs();

    // Play supercar sound
    playSupercarSound();
}

void updateOutputs()
{
    digitalWrite(strip_WS2812B_DIN_PIN_D2, strip_WS2812B_DIN_PIN_D2_rawData);
    digitalWrite(myActiveBuzzer_ActiveBuzzer_output_PIN_D3, myActiveBuzzer_ActiveBuzzer_output_PIN_D3_rawData);
}

void fadeall()
{
    for (int i = 0; i < NUM_LEDS; i++) {
        leds[i].nscale8(250);
    }
}

void playSupercarSound()
{
    // Emit sound like supercar telefilm using the active buzzer
    tone(myActiveBuzzer_ActiveBuzzer_output_PIN_D3, 1000); // Play tone at 1000 Hz
    delay(100); // Wait for 100 ms
    noTone(myActiveBuzzer_ActiveBuzzer_output_PIN_D3); // Stop the tone
    delay(100); // Wait for 100 ms
}

/* END CODE */