/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: Sastry_v1
	- Source Code compiled for: Arduino Uno
	- Source Code created on: 2023-11-11 23:54:18
	- Source Code generated by: M B G Sastry

********* Pleasedontcode.com **********/
/****** DEFINITION OF LIBRARIES *****/
#include 
#include 

/****** SYSTEM REQUIREMENT 1 *****/
/* Turn on and off a light when pushing a button */

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t Mybutton_PushButton_PIN_D2 = 2;
const uint8_t Mybutton_PushButton_PIN_D3 = 3;
const uint8_t Mybutton_PushButton_PIN_D4 = 4;
const uint8_t Mybutton_PushButton_PIN_D5 = 5;

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t MyLED_PIN_D6 = 6;
const uint8_t MyLED_PIN_D7 = 7;
const uint8_t MyLED_PIN_D8 = 8;
const uint8_t MyLED_PIN_D9 = 9;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
EasyButton button_D2(Mybutton_PushButton_PIN_D2);
EasyButton button_D3(Mybutton_PushButton_PIN_D3);
EasyButton button_D4(Mybutton_PushButton_PIN_D4);
EasyButton button_D5(Mybutton_PushButton_PIN_D5);

void setup(void)
{
  // put your setup code here, to run once:
  pinMode(Mybutton_PushButton_PIN_D2, INPUT_PULLUP);
  pinMode(Mybutton_PushButton_PIN_D3, INPUT_PULLUP);
  pinMode(Mybutton_PushButton_PIN_D4, INPUT_PULLUP);
  pinMode(Mybutton_PushButton_PIN_D5, INPUT_PULLUP);
  pinMode(MyLED_PIN_D6, OUTPUT);
  pinMode(MyLED_PIN_D7, OUTPUT);
  pinMode(MyLED_PIN_D8, OUTPUT);
  pinMode(MyLED_PIN_D9, OUTPUT);

  button_D2.begin();
  button_D3.begin();
  button_D4.begin();
  button_D5.begin();
}

void loop(void)
{
  // put your main code here, to run repeatedly:
  button_D2.read();
  button_D3.read();
  button_D4.read();
  button_D5.read();

  // Check button states and control LED accordingly
  if (button_D2.isPressed()) {
    digitalWrite(MyLED_PIN_D6, HIGH);
  } else {
    digitalWrite(MyLED_PIN_D6, LOW);
  }

  if (button_D3.isPressed()) {
    digitalWrite(MyLED_PIN_D7, HIGH);
  } else {
    digitalWrite(MyLED_PIN_D7, LOW);
  }

  if (button_D4.isPressed()) {
    digitalWrite(MyLED_PIN_D8, HIGH);
  } else {
    digitalWrite(MyLED_PIN_D8, LOW);
  }

  if (button_D5.isPressed()) {
    digitalWrite(MyLED_PIN_D9, HIGH);
  } else {
    digitalWrite(MyLED_PIN_D9, LOW);
  }
}