/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: LED Control
	- Source Code compiled for: Arduino Uno
	- Source Code created on: 2024-04-07 10:27:07

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* Με το πάτημα του EasyButton που είναι συνδεδεμένο */
	/* στον ακροδέκτη D2, το πράσινο LED που είναι */
	/* συνδεδεμένο στον ακροδέκτη D4 θα αναβοσβήνει με */
	/* ακρίβεια 10 φορές και στη συνέχεια θα σταματήσει */
	/* να αναβοσβήνει. */
/****** SYSTEM REQUIREMENT 2 *****/
	/* Όταν η πράσινη λυχνία LED, που είναι συνδεδεμένη */
	/* στον ακροδέκτη D4, σταματήσει να αναβοσβήνει, η */
	/* κόκκινη λυχνία LED, που είναι συνδεδεμένη στην */
	/* ακίδα D3, θα πρέπει να ανάβει για 15 δευτερόλεπτα */
	/* και μετα να σβηνη */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include  //https://github.com/evert-arias/EasyButton

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void onPressedForDuration();

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t tilt_PushButton_PIN_D2 = 2;

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t red_LED_PIN_D3 = 3;
const uint8_t green_LED_PIN_D4 = 4;

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
/***** used to store raw data *****/
bool red_LED_PIN_D3_rawData = 0;
bool green_LED_PIN_D4_rawData = 0;

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
/***** used to store data after characteristic curve transformation *****/
float red_LED_PIN_D3_phyData = 0.0;
float green_LED_PIN_D4_phyData = 0.0;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
EasyButton button(tilt_PushButton_PIN_D2);

void setup(void)
{
  // put your setup code here, to run once:

  pinMode(tilt_PushButton_PIN_D2, INPUT_PULLUP);

  pinMode(red_LED_PIN_D3, OUTPUT);
  pinMode(green_LED_PIN_D4, OUTPUT);
}

void loop(void)
{
  // put your main code here, to run repeatedly:
  button.read();   // Continuously read the status of the button
  updateOutputs(); // Refresh output data
}

void updateOutputs()
{
  if (button.isPressed()) { // Check if button is pressed
    // Toggle green LED 10 times
    for (int i = 0; i < 10; i++) {
      green_LED_PIN_D4_rawData = !green_LED_PIN_D4_rawData;
      digitalWrite(green_LED_PIN_D4, green_LED_PIN_D4_rawData);
      delay(100);
    }
  } else {
    green_LED_PIN_D4_rawData = 0;
    digitalWrite(green_LED_PIN_D4, green_LED_PIN_D4_rawData);
  }

  // Check if green LED has stopped blinking
  if (!green_LED_PIN_D4_rawData) {
    // Turn on red LED for 15 seconds
    red_LED_PIN_D3_rawData = 1;
    digitalWrite(red_LED_PIN_D3, red_LED_PIN_D3_rawData);
    delay(15000); // 15 seconds
    red_LED_PIN_D3_rawData = 0;
    digitalWrite(red_LED_PIN_D3, red_LED_PIN_D3_rawData);
  }
}