/********* Pleasedontcode.com **********

	Pleasedontcode thanks you for automatic code generation! Enjoy your code!

	- Terms and Conditions:
	You have a non-exclusive, revocable, worldwide, royalty-free license
	for personal and commercial use. Attribution is optional; modifications
	are allowed, but you're responsible for code maintenance. We're not
	liable for any loss or damage. For full terms,
	please visit pleasedontcode.com/termsandconditions.

	- Project: "Traffic Toggle"
	- Source Code compiled for: Arduino Uno
	- Source Code created on: 2024-06-08 13:57:28

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
	/* Develop a car and pedestrian traffic light */
	/* simulation with EasyButton. Utilize pin D2 for */
	/* button input, and pins D3, D4, D5, and D6 for LED */
	/* outputs. Ensure LEDs change states correctly in */
	/* the loop function, reflecting typical traffic */
	/* light behavior. */
/****** END SYSTEM REQUIREMENTS *****/


/****** DEFINITION OF LIBRARIES *****/
#include 	//https://github.com/evert-arias/EasyButton

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void updateOutputs(void);
void onPressed(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t Button_PushButton_PIN_D2 = 2;

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t Red_LED_PIN_D3 = 3;
const uint8_t Green_LED_PIN_D4 = 4;
const uint8_t Red_LED_PIN_D5 = 5;
const uint8_t Green_LED_PIN_D6 = 6;

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
/***** used to store raw data *****/
bool Red_LED_PIN_D3_rawData = 0;
bool Green_LED_PIN_D4_rawData = 0;
bool Red_LED_PIN_D5_rawData = 0;
bool Green_LED_PIN_D6_rawData = 0;

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
/***** used to store data after characteristic curve transformation *****/
float Red_LED_PIN_D3_phyData = 0.0;
float Green_LED_PIN_D4_phyData = 0.0;
float Red_LED_PIN_D5_phyData = 0.0;
float Green_LED_PIN_D6_phyData = 0.0;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
EasyButton button(Button_PushButton_PIN_D2); // Initialize EasyButton object with the button pin

/****** TRAFFIC LIGHT STATES *****/
enum TrafficLightState {
  CAR_GREEN,
  PEDESTRIAN_GREEN
};

TrafficLightState currentState = CAR_GREEN;

void setup(void)
{
	// put your setup code here, to run once:
	Serial.begin(115200);
	Serial.println();
	Serial.println(">>> EasyButton pressed example <<<");

	pinMode(Button_PushButton_PIN_D2, INPUT_PULLUP);

	pinMode(Red_LED_PIN_D3, OUTPUT);
	pinMode(Green_LED_PIN_D4, OUTPUT);
	pinMode(Red_LED_PIN_D5, OUTPUT);
	pinMode(Green_LED_PIN_D6, OUTPUT);

	button.begin(); // Initialize the button
	button.onPressed(onPressed); // Attach the onPressed function to the button

	// Initialize traffic light to initial state
	Red_LED_PIN_D3_rawData = LOW; // Car Red Light OFF
	Green_LED_PIN_D4_rawData = HIGH; // Car Green Light ON
	Red_LED_PIN_D5_rawData = HIGH; // Pedestrian Red Light ON
	Green_LED_PIN_D6_rawData = LOW; // Pedestrian Green Light OFF

	updateOutputs(); // Update the initial state of the LEDs
}

void loop(void)
{
	// put your main code here, to run repeatedly:
	button.read(); // Read the button state
}

void updateOutputs()
{
	digitalWrite(Red_LED_PIN_D3, Red_LED_PIN_D3_rawData);
	digitalWrite(Green_LED_PIN_D4, Green_LED_PIN_D4_rawData);
	digitalWrite(Red_LED_PIN_D5, Red_LED_PIN_D5_rawData);
	digitalWrite(Green_LED_PIN_D6, Green_LED_PIN_D6_rawData);
}

void onPressed()
{
	Serial.println("Button pressed");

	// Toggle traffic light state
	if (currentState == CAR_GREEN) {
		currentState = PEDESTRIAN_GREEN;
		Red_LED_PIN_D3_rawData = HIGH; // Car Red Light ON
		Green_LED_PIN_D4_rawData = LOW; // Car Green Light OFF
		Red_LED_PIN_D5_rawData = LOW; // Pedestrian Red Light OFF
		Green_LED_PIN_D6_rawData = HIGH; // Pedestrian Green Light ON
	} else {
		currentState = CAR_GREEN;
		Red_LED_PIN_D3_rawData = LOW; // Car Red Light OFF
		Green_LED_PIN_D4_rawData = HIGH; // Car Green Light ON
		Red_LED_PIN_D5_rawData = HIGH; // Pedestrian Red Light ON
		Green_LED_PIN_D6_rawData = LOW; // Pedestrian Green Light OFF
	}

	updateOutputs(); // Refresh output data
}